-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
- HP Community
- Printers
- Printer Wireless, Networking & Internet
- Wifi connection issue

Create an account on the HP Community to personalize your profile and ask a question
11-16-2024 07:45 AM
Hi @Acc27503,
Welcome to HP Support Community.
Thank you for posting your query, I will be glad to help you.
If your HP ENVY 6455e All-in-One Printer is having trouble connecting to Wi-Fi despite multiple attempts at rebooting, here are some steps you can try.
Ensure Printer is in Setup Mode:
- Reset the printer's network settings by pressing and holding the Wireless button (or Wi-Fi icon) and the Cancel button together for 3 seconds.
- The wireless light should start blinking, indicating it is in setup mode.
Use the HP Smart App:
- Download or open the HP Smart app on your device.
- Add a new printer by following the instructions in the app.
- Ensure your smartphone or computer is connected to the same network you want the printer to connect to.
Check Router Settings:
- Ensure the router's 2.4 GHz band is enabled (the printer does not support 5 GHz-only networks).
- Disable MAC address filtering or add the printer's MAC address to the allowed list.
Advanced Steps
Assign a Static IP:
- On your router's admin page, locate the connected devices or DHCP settings.
- Find your printer's MAC address (it should be listed in the HP Smart app or printer network settings) and assign it a static IP.
Update Printer Firmware:
- Temporarily connect the printer via USB to your computer.
- Use the HP website or HP Smart app to check for and install any firmware updates.
Manually Configure Wi-Fi:
- Use the printer's control panel to manually enter your Wi-Fi SSID and password if supported.
Reset Printer to Factory Defaults
If the above doesn't work:
- Turn the printer on.
- Hold the Wi-Fi button and the Power button for 10 seconds.
- Follow the setup process again.
I hope this helps.
Take care and have a good day.
Please click “Accepted Solution” if you feel my post solved your issue, it will help others find the solution. Click the “Kudos/Thumbs Up" on the bottom right to say “Thanks” for helping!
Alden4
HP Support
HP Support Community Moderator