• ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
  • ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
Guidelines
We have new content about printers, Click here to check it out!
Common problems for Connectivity Issues
We would like to share some of the most frequently asked questions about Printer Wi-Fi, Connectivity Issues and Offline Status. Check out this link: HP printer is offline or unavailable.
HP Recommended

Hp laser jet printer M110w will not connect.

I have disconnected printer, wifi, and still  nothing

Right now just the power light is on, no wifi  on

1 REPLY 1
HP Recommended

@jerry20434, Welcome to the HP Support Community!  

  

Thanks for reaching out about your query regarding Wi-Fi connection issues for HP LaserJet printers! 

We're thrilled to have the opportunity to assist you and provide a solution.  

  

It sounds like you're experiencing connectivity issues with your HP LaserJet M110w printer. Here are some steps you can follow to resolve the issue:

Restart Devices

  • Turn off the printer by pressing the Power button.
  • Turn off the computer or mobile device that the printer was set up with.
  • Restart the router.
  • After waiting a minute, reconnect the power cord to the printer and to a wall outlet. Turn on the printer.

Check the Printer and Network Connections

  • Ensure that the printer is within 8 meters (26 feet) of the router.
  • Check that the Wireless light on the printer's control panel is on and solid blue. If not, proceed to restore Wi-Fi setup mode.

Restore Wi-Fi Setup Mode on the Printer Many HP printers have a Wi-Fi setup mode to help connect to a network. If your printer doesn't have a touchscreen, please follow these steps:

  • Press and hold the Wireless and Cancel buttons on the printer until the Power button blinks, then wait for the Wireless light to blink.

Install the HP Smart App

  • Download the HP Smart app from 123.hp.com or your app store.
  • Open the app and create an account or sign in.
  • Within two hours of restoring Wi-Fi setup mode, follow the steps in the HP Smart app to add the printer and set up the wireless connection.

Using the Wireless Setup Wizard (if applicable)

  • For printers with a touchscreen, you can use the Wireless Setup Wizard:
    • Open the Wireless or Setup menu on your printer.
    • Select Wireless Setup Wizard.
    • Follow the prompts to select your Wi-Fi network and enter the password.

Check for Router Requirements

  • Ensure that the printer is not connected to a computer with a USB cable.
  • Confirm that the router is not restricting the printer’s IP address.
  • Ensure the 2.4 GHz band is enabled if your printer does not support 5.0 GHz.  

 

Hope this helps! 

Take care, and have an amazing day!  

  

Did we resolve the issue? If yes, Please consider marking this post as "Accepted Solution" and click "Yes" to give us a helpful vote - your feedback keeps us going!  

  

Regards, 

ZOEY7886
I am an HP Employee

† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the <a href="https://www8.hp.com/us/en/terms-of-use.html" class="udrlinesmall">Terms of Use</a> and <a href="/t5/custom/page/page-id/hp.rulespage" class="udrlinesmall"> Rules of Participation</a>.