Wifi won't connect (Laser Jet Pro M118dw) wifi light just blinks

[Dropzone]

Laser Jet Pro M118dw wifi light just blinks. Can not get it on my wireless network! Have tried rebooting my wifi router and my Android 23 Ultra. I have other prite4s that I can see them but NOT my HP...

[Rachel571]

Hi @Dropzone,

Welcome to HP Support Community.

Thank you for posting your query, I will be glad to help you.

If your HP LaserJet Pro M118dw's Wi-Fi light is blinking and you're unable to connect it to your wireless network, here are some steps to troubleshoot the issue:

1. Check Wi-Fi Status

• Ensure that the printer is within range of the Wi-Fi router and there are no physical obstructions.

2. Reset Network Settings

1. On the printer’s control panel, go to Setup (the gear icon).
2. Navigate to Network Setup > Restore Network Defaults.
3. Confirm the reset and wait for the printer to restart.

3. Use the Wireless Setup Wizard

1. After resetting, go back to Setup > Network Setup.
2. Select Wireless Setup Wizard.
3. Follow the prompts to select your Wi-Fi network and enter the password.

4. Check for Network Issues

• Make sure your Wi-Fi network is functioning properly. Check if other devices can connect to the network without issues.

5. Disable Wi-Fi Direct

Sometimes, Wi-Fi Direct can interfere with normal wireless connections:

1. Go to Setup > Network Setup > Wi-Fi Direct and disable it if it's enabled.

6. Update Firmware

• Ensure your printer firmware is up to date. You can check the HP website for any firmware updates.

7. Use WPS (if supported)

If your router supports WPS:

1. Press the WPS button on your router.
2. On the printer, press the Wi-Fi button. This may allow it to connect automatically.

8. Check Security Settings

• Ensure your router is set to use WPA2 security, as some printers may have issues with WPA3.

9. Try a Different Network

• If possible, try connecting to a different Wi-Fi network to see if the issue is with the printer or the network

I hope this helps.

Take care and have a good day.

Please mark this post as “Accepted Solution” if the issue is resolved and if you feel this reply was helpful click “Yes”.

Rachel571

HP Support