Will not connect to my wifi

[jt90]

I just got tmobile home internet and all my devices, phone, computer tv etc are all connecting fine but our printer will not connect. It locates the wifi netwrork and i enter the password and it tells me connection unsuccessful

[Dragon-Fur]

@jt90 

Welcome to the HP English Community --

That's an older printer model -- it supports 2.4GHz but not 5GHz.

If not done, add the following to your checkpoints.

Make sure your router is configured to support both frequencies.

Create a separate SSID named network for each frequency and connect the printer to the SSID named network on the 2.4GHz side.

Example

SSID_Dual_Band_Example_Router_2

Ask your Wireless provider for help configuring the router.

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=

Dual Band Network - Considerations

Reminders 

Do not ignore your router --

A router that is weak, outdated, poorly located, or incorrectly configured can cause all sorts of odd network behavior issues.

If the printer supports it, connecting using Ethernet is generally a better choice.

If your router supports it, create a separate SSID named network for each frequency.

Connect the printer to the SSID network you want the printer to use on the network.

Wireless

Some printers, particularly older models, only support Wireless at 2.4GHz

Some printers support Wireless at both 5GHz and 2.4GHz – but not at the same time

Regardless, if the printer won't work or cannot connect to your 5GHz SSID named network, connect to the 2.4GHz network.

If you are running a Dual Band Network,

 Check that the router is set up to broadcast all frequencies it supports.

Next,

If your router supports it,

On your router:

 Create a separate SSID named network for each frequency supported by the router

 What?  Create one SSID named network for 5GHz and one SSID named network for 2.4GHz

and

 Connect the printer to the SSID named network on the frequency / band you want it to use.

In general,

• 2.4GHz is less fussy about obstacles and supports a longer distance (separation) between router and device (printer)
• 5GHz is faster

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=

Example – EWS Setup – IPv4

EWS > HP Document / How-to (original format)

Use the HP printer Embedded Web Server (EWS)

NOTE:  Find printer IP address

Section Open the EWS over a local network orientation

Ethernet

Open your Browser > Type / enter the Printer IP address into URL / Address bar

Tab Network > Wired (802.3) > IPv4 Configuration

Wireless

Open your Browser > Type / enter the Printer IP address into URL / Address bar

Tab Network > Wireless (802.11) > IPv4 Configuration

As Available:

Tab Network > Wireless (802.11) > Advanced

Network Interface on / off, Network SSID name, Security Settings, Passphrase / Password

Select and connect to the correct SSID / network name for the bandwidth you are using.

Note:   It is not mandatory that you use a manual / static IP address.  Doing so can improve stability.

Sample

EWS_9025_Network_IPv4_Configuration_5

=--=--=--=--=--=--=--=--=--=--=--=--=--=--=--=--=--=

References / Resources

HP Printer Home Page - References and Resources

Learn about your Printer - Solve Problems

“Things that are your printer”

When the website support page opens, Select (as available) a Category > Topic > Subtopic

NOTE: Content depends on device type and Operating System

Categories: Warranty Check, Alerts, Troubleshooting, Ink & Paper, HP Software & Drivers / Firmware Updates, Setup & User Guides, Product Specifications, Account & Registration, Warranty & Repair

Open 

 Product Home - Printers

 Enter the device type and model name of your HP product

OR

 Select a saved product from HP Account Dashboard

OR

HP ENVY 5530 e-All-in-One Printer  

Thank you for participating in the HP Community --

Real people who own, use, and support HP devices.

Click Yes to say Thank You for the help !

Question / Concern Answered, Click my Post "Accept as Solution"

🎄