looking for HP Neverstop Laser MFP 1200w information light.

[quaydo]

I am trying to

Restore Wi-Fi setup mode on your HP printer

and looking for HP Neverstop Laser MFP 1200w information light to connect to router with an I network light?

[Hawks_Eye]

Hi @quaydo 

Welcome to the HP Support Community! 

Thanks for posting your query! We're here to help you get back up and running.

To restore Wi-Fi setup mode on your HP Neverstop Laser MFP 1202w and connect it to your router, follow these steps:

Restoring Wi-Fi Setup Mode:

Press Buttons on the Printer:

• Locate the Wireless and Cancel buttons on your printer.
• Press and hold both buttons simultaneously for about 3 seconds until the printer restarts.
• After the restart, wait for the Wireless light to blink blue. This indicates the printer is in Wi-Fi setup mode.

Reconnect Using the HP Smart App:

• Open the HP Smart app on your computer or mobile device.
• Follow the prompts to reconnect the printer to your Wi-Fi network.

 

Information Light on HP Neverstop Laser MFP 1200w:

The Information light on the HP Neverstop Laser MFP 1200w provides status updates. Here's what it typically indicates:

• Solid Light: The printer is ready.
• Blinking Light: The printer requires attention (e.g., paper jam or toner issue).
• Wireless Light: Indicates the status of the Wi-Fi connection:
  • Blinking Blue: Printer is in setup mode.
  • Solid Blue: Printer is connected to the wireless network.

If this solution hits the spot, please come back and click "Accepted Solution" to help others find the answer. And if you'd like to say thanks, select "Yes" on the bottom left of the public post, as that would make our day! 

Take care, and have an amazing day!

Regards, 

Hawks_Eye