need to reconnect to wireless after installing new modem

[0348]

I need to reconnect my HPENVY5052 to the wireless network. How do I turn it on?

[A_Gayathri]

Hi @0348,

Welcome to The HP Support Community.  

Thank you for posting your query, I will be glad to help you.

I understand you are to reconnect your HP ENVY 5052 All-in-One Printer to your wireless network after installing a new modem, follow these steps:

Turn On the Printer:

• Ensure the printer is plugged into a power source.
• Press the power button on the printer to turn it on. The power button is usually located on the front panel of the printer.

Connect to Wireless Network:

• On the printer's control panel, tap the Wireless icon or button. It might look like a signal strength icon or a series of radio waves.
• Select Settings or Setup from the menu.
• Choose Wireless Setup Wizard or Wireless Settings.
• The printer will search for available networks. When the list appears, select your new network (SSID) from the list.
• Enter the new network password (WiFi key) when prompted. Make sure you enter it exactly as it is (case-sensitive).

Confirm Connection:

• The printer should connect to the wireless network. You can print a network configuration page from the printer’s control panel to verify the connection status.
• If there are issues, ensure your new modem is properly configured and connected to the internet, and try restarting the printer and modem.

Update Printer Settings on Your Computer:

• On your computer, open the HP Smart app or Printers & Scanners settings.
• Remove the old printer connection if it exists, and then add the printer again by selecting Add Printer or Add Device. Your computer should detect the printer on the network.

Refer to this document:  HP ENVY 5052 All-in-One Printer User manual

I hope this helps. 

Take care and have a good day.

Please click “Accepted Solution” if you feel my post solved your issue, it will help others find the solution.