-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
- HP Community
- Printers
- Printer Wireless, Networking & Internet
- network light blinking in a old set up printer

Create an account on the HP Community to personalize your profile and ask a question
07-21-2024 10:27 AM
Hi @suecass29,
Welcome to HP Support Community.
Thank you for posting your query, I will be glad to help you.
If your HP 2540 printer's network light is blinking and the printer remains offline, here are some troubleshooting steps you can follow.
Check Wi-Fi Connection:
- Ensure that your printer is within range of your Wi-Fi network.
- Restart your Wi-Fi router to refresh the network.
Restart Printer:
- Turn off the printer, wait for 30 seconds, then turn it back on.
Reconfigure Wireless Settings:
- On the printer, go to the wireless setup menu (usually found in the settings or network section) and reconnect to your Wi-Fi network.
- You might need to enter your Wi-Fi network password again.
Update Printer Firmware:
- Check if there are any firmware updates available for your printer. You can usually find these on the HP website or via the HP Smart app.
Check Printer’s IP Address:
- Print a network configuration page from your printer (usually found in the printer’s settings).
- Ensure that the IP address listed on this page is within the range of your home network.
Re-add Printer to Your Computer:
- Go to your computer's printer settings and remove the old printer.
- Add the printer again using the "Add a printer" option and follow the on-screen instructions.
Reset Network Settings:
- If the above steps don’t work, you may need to reset the network settings on your printer and set it up again from scratch.
Check for Interference:
- Ensure there are no devices or obstructions that could interfere with the Wi-Fi signal between your printer and router.
I hope this helps.
Take care and have a good day.
Please click “Accepted Solution” if you feel my post solved your issue, it will help others find the solution. Click the “Kudos/Thumbs Up" on the bottom right to say “Thanks” for helping!
Alden4
HP Support
HP Support Community Moderator