Note on archived topics.
01-25-2015 07:30 PM
When I tried to set up the Web Services, I got an error.
The error is "Server problem. The printer could not connect to Web Services. The server might be busy or temporary unavilable. Try it again later."
I am connected to the internet (WiFi) and the Internet connection is no problem. I have had this problem for 2days. I would appreciate any your advice.
Solved! Go to Solution.
01-26-2015 12:12 AM
Look at the settings here and try to enable Web Services if not already.
What is the IP address of your printer?
Provide the address, subnet mask, gateway and DNS settings please.
Did you manually set the address or did this get it from your home router via DHCP?
I assume a PC on the same network can get to the Internet without any issues?
01-26-2015 12:22 AM
1. From the printer control panel display, touch Setup.
2. Touch Web Services Setup.
4. In the Auto Update screen, touch Yes to allow the printer to automatically check for and install product updates.
NOTE: If a printer update is available, the printer will download and install the update, and then restart. You will have to repeat the instructions from step 1 to set up ePrint.
NOTE: If prompted for proxy settings and if your network uses proxy settings, follow the on- screen instructions to set up a proxy server. If you do not have the proxy details, contact your network administrator or the person who set up the network.
5. When the printer is connected to the server, the printer prints an information page. Follow the instructions on the information page to finish the setup.
01-27-2015 11:46 AM
I did your instruction, but i still had the same problem. However, after i printed web access test report, changed the date on my printer, and auto-off is on, my printer was somehow able to connected the web services! Thank you very much for all your advices!
01-27-2015 12:09 PM
Was the date on the printer set incorrectly?
What was the date before you changed it?
Some internet services use date & time to prevent abuse, for example, try logging on to your bank internet services if the clock on the PC is wrong!
Anyway, glad it is up and running, great job for seeing through to a successful resolution