wireless printer not picking up signal

[L5959]

Wireless Test report says wireless = Fail

All the rest say    "Not Run"

Wireless radio on your HP printer is currently turned OFF but I don't know how to turn it on... were have been away and I have cvome home to a printer not working and I am not a techy???
HELP!!

Thanks

L5959 

I have an all in one printer laserjet MFP if this helps??
Thanks L5959

[Charles001]

What is the model of the printer? And if there is a wireless icon or button on it, press it and what happens?

[L5959]

Model is laserjetM1217 nfw

[L5959]

The wireless icon keeps searching "initialinzing" then the screen goes blank 

[Charles001]

This user manual: http://h10032.www1.hp.com/ctg/Manual/c02008063 says, to check the status of the wireless:

a. On the product control panel, press the Setup (that look like a wrentch) button

b. Use the arrow buttons to select the Reports menu, and then press the OK button.

c. Use the arrow buttons to select the Config report option, and then press the OK button.

You might want just power cycle the printer, and if that doesn't help, turn off and back on the wireless (hold down the wireless button for 5 seconds to turn off, and press once to turn on).

[L5959]

I can't get the  screen to stay on long enough... it shows "initializing " ... then the screen shuts off before I can use the wrench setting ??? is there a re-boot for printers??  I have turned it on and off a million times today and now it won't even make a photo copy 😞

[L5959]

Hello Charles

My printer decided to  talk to me finally!! I was able to go through the steps and  print off the " config  self test"

[L5959]

It is now showing  "used supply installed"  every now and then but then will go back to the "ready " screen

[L5959]

Sorry I read this wrong it says    " used supply in use"

[Charles001]

That message gets displayed if you remove and reinstall the toner cartridge (supply). It's basically saying the cartridge is not new. Should not cause any problem.