CARD STOCK

[SUNMANEAST1946]

HOW DO I PRINT ON 85LB CARD STOCK WITH A P

HP P1006 LAZER PRINTER ...WON'T FEED

[Gaya1239]

Hi @SUNMANEAST1946,

Welcome to The HP Support Community.  

Thank you for posting your query, I will be glad to help you.

I understand the HP LaserJet P1006 printer is designed primarily for standard paper types and may not officially support heavier materials like 85lb card stock. However, you can try these steps to improve your chances of printing successfully:

1. Check Printer Specifications

• Verify the maximum paper weight the printer can handle in its user manual or specifications. The P1006 typically supports up to 163 gsm (~43lb bond or ~60lb cover stock). Card stock heavier than this may cause feeding issues.

2. Use the Manual Feed Tray

• The P1006 has a single-sheet manual feed slot.
• Load one sheet of card stock at a time into the manual feed slot to avoid jams.
• Adjust the paper guides snugly against the edges of the card stock.

3. Adjust Print Settings

• Open the Print Properties or Printer Preferences window in your print dialog.
• Select the Media Type or Paper Type option and set it to Card Stock or Heavy Paper if available.
• Adjust the paper weight setting to the heaviest option.

4. Avoid Overloading the Tray

• Use only one sheet at a time, especially for thicker stock, as the rollers may struggle with multiple sheets.

5. Clean the Printer Rollers

• Dust or wear on the feed rollers can cause feeding issues, especially with heavier paper. Clean the rollers using a lint-free cloth slightly dampened with water.

6. Flatten the Card Stock

• Ensure the card stock is perfectly flat and free from curls or bends. This reduces resistance during feeding.

7. Use Compatible Media

• If the 85lb card stock is too thick for the printer, try slightly lighter card stock within the printer's specifications.

8. Test and Adjust

• Test print a single sheet to see if it feeds properly.
• If feeding issues persist, gently guide the sheet into the manual feed slot during printing.

9. Alternative Solutions

• If the printer cannot reliably handle 85lb card stock, consider using a printer designed for heavy materials or taking the job to a professional printing service.

I hope this helps. 

Take care and have a good day.

Please click “Accepted Solution” if you feel my post solved your issue, it will help others find the solution. Click the “Kudos/Thumbs Up" on the bottom right to say “Thanks” for helping!