Can I manually feed the HP Photosmart 7520 so that the card stock I am printing onto doesn't bend?

[MDaukas]

I am trying to print onto heavy cardstock and sticker sheets using my HP Photosmart 7520 and the thicker paper gets caught in the rollers.  Is there a way to manually feed the paper so that it doesn't get stuck/bent inside the printer?

Thanks,

Mike

[Nee2]

Hi

It is always recommended that you use HP Paper to print.

Kindly check if your paper matches the list of supported paper types.

The following table contains a list of supported paper sizes.

Paper type	Paper size
U.S. Letter	216 x 279 mm (8.5 x 11 in)
Legal	216 x 356 mm (8.5 x 14 in)
Executive	184 x 267 mm (7.24 x 10.51 in)
Cabinet	127 x 177.8 mm (5 x 7 in)
O**bleep**u hagaki	200 x 148 mm (7.87 x 5.83 in)
A4	210 x 297 mm (8.27 x 11.69 in)
A5	148 x 210 mm (5.83 x 8.27 in)
A6	105 x 148 mm (4.13 x 5.83 in)
10 x 15 cm	100 x 150 mm (3.9 x 5.9 in)
3.5 x 5 in	89 x 127 mm (3.5 x 5 in)
4 x 6 in	101.6 x 152.4 mm (4 x 6 in)
5 x 7 in	127 x 177.8 mm (5 x 7 in)
8 x 10 in	203.2 x 254 mm (8 x 10 in)
13 x 18 cm	130 x 180 mm (5.1 x 7.1 in)
L	89 x 127 mm (3.5 x 5 in)
2L	127 x 178 mm (5 x 7.01 in)
4 x 6 in (tab)	101.6 x 152.4 mm (4 x 6 in)
10 x 15 cm (tab)	100 x 150 mm (3.9 x 5.9 in)
B5 (JIS)	182 x 257 mm (7.17 x 10.12 in)
B5 (ISO)	176 x 250 mm (6.93 x 9.84 in)
Japanese Postcard	100.1 x 148.1 mm (3.94 x 5.83 in)

[JeanJAB · Accepted solution]

Hi MDaukas,

Unfortunately the printer has a "U" shaped paper path, and there is no way I know of to bypass that.

Jean

[KATHIACKERMANN]

I printed several color documents on card stock, and they printed perfectly.  Then I wanted to print 5 more and printer shows message "out of paper" and HP recommends using HP Colorlok paper.  I had printed perfectly 2 minutes earlier!