Deskjet 2752e EE light

[harry1113]

I currently have a HP Deskjet 2752e. Unfortunately, it show EE code with orange light blinking. I tried to plug out the power cord and wait for a minute, it works! but after a few munites, it starts showing orange lights with EE error again. I do have assignment need to be printed tomorrow, I'm so worry about it

[harry1113]

is there any support here?

[Raj_05]

Hi @harry1113,

Welcome to HP Support Community.  

Thank you for posting your query, I will be glad to help you. 

I suggest you do a Hard Reset on the printer

(1) Turn the printer on, if it is not already on.

(2) Wait until the printer is idle and silent before you continue.

(3) With the printer turned on, disconnect the power cord from the rear of the printer.

(4) Unplug the power cord from the wall outlet.

(5) Wait at least 60 seconds.

(6) Plug the power cord back into the wall outlet.

NOTE: HP recommends connecting the printer power cord directly to the wall outlet.

(7) Reconnect the power cord to the rear of the printer.

(8) Turn on the printer, if it does not automatically turn on.

The printer might go through a warm-up period. The printer lights might flash, and the carriage might move.

Wait until the warm-up period finishes and your printer is idle and silent before you proceed.

Then, click on this link and follow the solution under Issue: One or both Estimated Ink Level lights blink, the Attention light blinks, and an 'E' displays

Keep me posted, on how it goes!

If the information I've provided was helpful, give us some reinforcement by clicking the Accepted Solution and Kudos buttons, that'll help us and others see that we've got the answers!

Have a great day! 

^ Alden4
HP Support