Deskjet F2430 ink cartridge access door will not open

[Vonbeck]

The access door will not open to enable replacement of the cartridges

[Betty0610]

@Vonbeck

Welcome to the HP Support Community.

Let's try to reset the Printer here:

Turn the printer on, if it is not already on.

1. Wait until the printer is idle and silent before you continue.
2. With the printer turned on, disconnect the power cord from the rear of the printer.
3. Unplug the power cord from the wall outlet.
4. Wait at least 60 seconds.
5. Plug the power cord back into the wall outlet.
6. NOTE: HP recommends connecting the printer power cord directly to the wall outlet.
7. Reconnect the power cord to the rear of the printer.
8. Turn on the printer, if it does not automatically turn on.
9. Wait until the printer is idle and silent before you proceed.

Also, try connecting the Printer to a different wall outlet directly.

Try updating the firmware: https://support.hp.com/us-en/document/c02919168

If the issue persists, I recommend you to contact the HP Support Team regarding this as this could be a hardware issue.

Link: www.hp.com/contacthp/

Note:  Select the country accordingly to get the contact details for support.

Let me know if this helps.

If the information I've provided was helpful, give us some reinforcement by clicking the Accepted Solution button, that'll help us and others see that we've got the answers!

Thanks!

Have a great day!