-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
Create an account on the HP Community to personalize your profile and ask a question
Your account also allows you to connect with HP support faster, access a personal dashboard to manage all of your devices in one place, view warranty information, case status and more.
Check some of the most frequent questions about Instant Ink: HP INSTANT INK, HP+ PLANS: INK AND TONER.
Check out our Black or Color Ink Not Printing, Other Print Quality Issues info about: Print quality and Cartridge Issues.
It has been a while since anyone has replied. Simply ask a new question if you would like to start the discussion again.
1
0
0
HP Recommended
1 ACCEPTED SOLUTION
Accepted Solutions
- last edited on by
MayS
HP Recommended
You most likely don't need a USB cable.
If your computer is wirelessly connected to your network you would not need a USB.
If your computer is connected via Ethernet you would need a USB to connect the printer through your PC, however, you may connect it to the network using any Apple or Android mobile device instead.
Press and hold the Wireless and Cancel buttons until the Wireless light and Power light starts to flash. You must complete the network setup within 2 hours.
If your computer is connected with a wireless connection to your network, install the HP Software now and you will not be asked to connect a cable.
If it is connected with a network cable, follow Connect a printer that does not have a touchscreen control panel below, either with WPS (if your router supports a such) or with HP Smart from your mobile device:
https://support.hp.com/us-en/document/ish_1736500-1626554-16
Shlomi
Click the Yes button to reply that the response was helpful or to say thanks.
If my post resolve your problem please mark it as an Accepted Solution 🙂
- last edited on by
MayS
HP Recommended
You most likely don't need a USB cable.
If your computer is wirelessly connected to your network you would not need a USB.
If your computer is connected via Ethernet you would need a USB to connect the printer through your PC, however, you may connect it to the network using any Apple or Android mobile device instead.
Press and hold the Wireless and Cancel buttons until the Wireless light and Power light starts to flash. You must complete the network setup within 2 hours.
If your computer is connected with a wireless connection to your network, install the HP Software now and you will not be asked to connect a cable.
If it is connected with a network cable, follow Connect a printer that does not have a touchscreen control panel below, either with WPS (if your router supports a such) or with HP Smart from your mobile device:
https://support.hp.com/us-en/document/ish_1736500-1626554-16
Shlomi
Click the Yes button to reply that the response was helpful or to say thanks.
If my post resolve your problem please mark it as an Accepted Solution 🙂
Be alert for scammers posting fake support phone numbers and/or email addresses on the community.
If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
Didn't find what you were looking for?
Ask the community