Envy Photo 6255 Error Code 0XB8D16066

[rich890m]

Was doing and check update on the printer and received Error Code 0XB8D16066 and all flashing lights on the console and power switch

[Flower_Bud]

@rich890m,

Welcome to HP Forums,

This is a great place to get support, find answers and tips,

Thank you for posting your query, I'll be more than glad to help you out 🙂

As I understand, your printer is giving an error message.

Don't worry as I'll be glad to help, however, to provide an accurate resolution, I need a few more details:

When was the last time it worked fine?

Have you tried any troubleshooting steps? 

Are you able to make a photocopy?

Let's try these steps to resolve the issue: 

Step 1: Reset the printer

In some cases, removing the ink cartridges and resetting the printer can clear the error message.

1. Turn on the printer.

2. Wait until the printer is idle and silent before you continue.

3. Disconnect the USB cable from the rear of the printer. If your printer has a network or wireless connection, leave it connected.

4. Remove the ink cartridges from the printer.

5. With the printer turned on, disconnect the power cord from the rear of the printer and from the wall outlet or power strip.

6. Wait at least 60 seconds.

7. Plug the power cord back into the wall outlet.

      NOTE: HP recommends connecting the printer power cord directly to a wall outlet.

8. Reconnect the power cord to the rear of the printer.

9. Turn on the printer, if it does not automatically turn on.

   The printer might go through a warm-up period. The printer lights might flash, and the carriage might move.

10. Wait until the warm-up period finishes and your printer is idle and silent before you proceed.

11. Reinsert the ink cartridges, and then close the ink cartridge access door.

12. If you receive a prompt to print a calibration page, do so.

13. If you disconnected the USB cable, reconnect it to the rear of the printer.

14. Try to print.

    If the issue persists, please contact our phone support.

HP Support can be reached by clicking on the following link:

* Open link: www.hp.com/contacthp/

* Enter the product number or select to auto detect

* Scroll down to "Still need help? Complete the form to select your contact options"

* Scroll down and click on HP contact options - click on Get a Case & phone number.

They will be happy to assist you immediately.

If the unit is under warranty repair services under the manufacturer's warranty will be free of charge.