Error State

[1122111]

So, recently my printer has been in an error state.

As one can see, my printer is the wireless 410 series, and had been working fine since then.

I have not updated Windows.

Whenever I try to print, I get the message that the printer is in an error state.

I have tried most ways to fix the problem (driver reinstall etc.) but non of them worked.

I would appreciate if someone could help me.

Danke.

[sandytechy20]

@1122111

Welcome to the HP support community.

Use HP Print and Scan Doctor to check connectivity

Download HP Print and Scan Doctor.

1. Run HPPSdr.exe from the download location on your computer.

2. Once HP Print and Scan Doctor opens, click Start, and then select your printer.

   • If your printer is not in the list, turn it off and on, and then click Retry.

   • If there is a connection problem, follow the instructions in HP Print and Scan Doctor.

3. If a screen prompts you to turn on printer updates, click Yes.

4. If a screen prompts you to make your printer the default printer, click Yes.

5. Try to print.

Assign a manual IP address and that should fix the issue.

• Press the Wireless button  and the Information button  at the same time.

Setting a Static IP Address

Once you know your printer’s IP address from the page you printed, entering it is pretty easy. Here’s what you do:

1. Run your Web browser.
2. In the Web browser’s address bar, type the IP address of your printer and press Enter. Assuming you entered the right address, the HP printer control panel should appear.
3. Click the Networking tab.
4. Under Connections, click Wireless.
5. Under IP Address Configuration, click Manual IP.
6. Enter the IP address, subnet mask, and default gateway in the appropriate boxes.
7. Click Apply.

You can refer this HP document for more assistance:- Click here

Let me know how it goes.

To thank me for my efforts to help you, please mark my post as an accepted solution so that it benefits several others.

Cheers.