Error code 0x61000048

[AC5219]

HP Pro 6978. Tells me I have paper jammed; have checked thoroughly - no jam. Tells me to power off then on. Then error code 0x61000048 comes on. Impossible to reach support- am out of warranty and can't even get to support with willingness to pay.

[Kumar0307]

@AC5219, Welcome to the HP Support Community! I’m here to help.

I understand the printer is stuck at this false error. Check if you can bypass the error to access the home screen of the printer.

If yes, let us try this:

Go to Setup > Tools > Restore to factory defaults

Note: You will have to reconnect the printer to the wireless network after the reset

Reset the printer

1. With the printer turned on, disconnect the power cord from the rear of the printer.
2. Wait at least 60 seconds.
3. Reconnect the power cord to the rear of the printer.
4. Turn ON the printer, if it does not automatically turn on.
5. Wait until the printer is idle and silent before you proceed.

Note: HP recommends connecting the printer directly to a wall outlet rather than a surge protector or a power strip.

If this does not help, unplug the power cable and hold the power button down for 10-15 seconds and release it. Power on the printer and check.

Update the printer firmware

Click here to download and install the latest printer firmware from your computer.

Click here to know different methods of updating printer firmware.

Check for any jams inside the printer and make sure the carriage is moving freely.

Refer to - Paper Jam Error

If the error persists, I'm afraid this is a hardware failure. 

If the printer is out of warranty, I suggest you upgrade the printer. You may visit Hp Store to check the available printers.

Keep me posted for any other assistance.

Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.

Click on the YES button to reply that the response was helpful and/or to say “Thank You”.

Have a great day!