Error code OXB3DEEBEB

[jeroen63]

My printer Envy 6234 displays Error code OXB3DEEBEB. I've seen the other post but the solution was private. Can anyone help me with a similar solution?

[Rainbow23]

Hi @jeroen63

Welcome to HP Support Community. This is a great place to post questions and find answers.
Thank you for posting your query. I will be glad to help you.

I see that you are getting 0X error on your HP printer.

Please follow the steps listed below reset the printer.
1. Turn the printer on if it is not already on.
2. Wait until the printer is idle and silent before you continue.
3. With the printer turned on, disconnect the power cord from the rear of the printer.
4. Unplug the power cord from the wall outlet.
5. Wait at least 60 seconds.
6. Plug the power cord back into the wall outlet.
NOTE: HP recommends connecting the printer power cord directly to the wall outlet.
7. Reconnect the power cord to the rear of the printer.
8. Turn on the printer if it does not automatically turn on.

You may also check this document. 

Let me know if this helps.

Please click “Accepted Solution” if you feel my post solved your issue, it will help others find the solution. Click the “Kudos/Thumbs Up" on the bottom right to say “Thanks” for helping!

Take care and have a good day.

[1Ray_Ray]

Disconnecting the power did not correct the problem. Followed directions but the issue comes back. Printer will work for a short time then displays another error. Todays error code is: OXB8047B14

[Rainbow23]

Hi @1Ray_Ray

Welcome to the HP Support Community. It is a great way to post questions and find resolutions by working with specialists in the HP community.

This could be a hardware issue with the unit and may need repair. We need to provide the solution to this issue in a private message as this information cannot be shared on a public post.

I have sent you a private message with this information. 

In order to access your private messages, click the Private message icon on the upper right corner of your HP Community profile Next, to your profile Name, you should see a little blue envelope, please click on it or simply click on this link 

Keep me posted and have a great day ahead! 

Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution. Click the “Yes" on the bottom right to say “Thanks” for helping