Error message 0 x 6 1 0 0 0 0 4 a

[JCHood]

My printer stopped functioning properly and has given me the following message... There is a problem with the printer or print system. Turn the printer off, then on. If you continue to get this message contact HP. 0X610004a. And this printer is no longer under warranty

[Betty0610]

@JCHood

Welcome to the HP Support Community.

Let's try to reset the Printer here:

Turn the printer on, if it is not already on.

1. Wait until the printer is idle and silent before you continue.
2. With the printer turned on, disconnect the power cord from the rear of the printer.
3. Unplug the power cord from the wall outlet.
4. Wait at least 60 seconds.
5. Plug the power cord back into the wall outlet.
6. NOTE: HP recommends connecting the printer power cord directly to the wall outlet.
7. Reconnect the power cord to the rear of the printer.
8. Turn on the printer, if it does not automatically turn on.
9. Wait until the printer is idle and silent before you proceed.

Clear obstructions from the carriage area inside the printer.

1. With the printer on, disconnect the power cord from the rear of the printer.

2. Open the door to access the carriage inside of the printer.

3. Look in the carriage path for debris such as crumpled paper or dislodged labels, and then remove any that you find.

   

4. Use your hand to move the carriage to each side, making sure it moves freely. If the carriage is stalled or docked to one side of the printer and you cannot move it, continue with these steps.

   

5. Close the carriage access door.

6. Reconnect the power cord to the rear of the printer, and then turn the printer on.

If the error persists, continue to the next step.

Step 2: Reset the printer

Reset the printer to recover from printer failures.

1. With the printer turned on, disconnect the power cord from the printer.

2. Unplug the power cord from the power source.

3. Wait 60 seconds.

4. Reconnect the power cord to a wall outlet and to the printer.

   NOTE: 

   HP recommends plugging the printer directly into a wall outlet.

5. Turn the printer on.

If the issue persists, I recommend you to contact the HP Support Team regarding this as this could be a hardware issue.

Link: www.hp.com/contacthp/

Note:  Select the country accordingly to get the contact details for support.

Let me know if this helps.

If the information I've provided was helpful, give us some reinforcement by clicking the Accepted Solution button, that'll help us and others see that we've got the answers!

Thanks!

Have a great day!