Error: "unable to print. Check the printer"

[Johnny581]

Hi,

Printer will not printer from Excel, Word, Adobe, but will print reports from HP Smart.

At some point it said "no paper", although had plenty of paper.

HP Smart message reads:
"Unable to print. Check the printer

Check your printer status to reprint after resolving the issue"

1. Cartridges are original and full.
2. Restarted PC and Printer.
3. Printer is online and ready.
4. Printed reports from HP Smart.
5. HP Smart could not print PDF.

Any help is appreciated.

Regards.

[Anand_Andy · Accepted solution]

Hi @Johnny581,

Welcome to the HP Support Community

I understand you are facing an issue with your HP DeskJet Ink Advantage 4675 All-In-One Printer. Not to worry I will help you to get a resolution to resolve the issue.

Let's perform a power drain: 

• With the printer turned on, disconnect the power cord from the rear of the printer and also unplug the power cord from the wall outlet.
• Remove USB cable, if present.
• Wait for 2-3 minutes, press and hold the power button on your printer for about 30 seconds to remove any additional charge.
• Now plug back the power cable straight to a wall outlet without any surge protector or an extension cord (This is important) and then plug back the power cord to the printer.
• Turn on the printer and wait till warm-up period finishes and the printer is idle

Update the printer firmware 

• Click here to download and install the latest printer firmware from your product
• Click here to know different methods of updating printer firmware.

If the issue persists, I recommend you delete the driver and root level and retry, follow the steps below: 

1) In Windows, search for and open Programs and features 

2) Select your HP Printer 

3) Select Uninstall 

4) In Windows, search for and open Devices and printers 

5) In the Devices and Printers windows look for your HP printer. If you see it listed right-click on it and choose ‘Delete’ or ‘Remove Device’ 

6) Open up the run command with the “Windows key + R” key combo. 

7) Type printui.exe /s and click Ok. (Note: there is a space in between “printui.exe”

😎 Click on the “Drivers” tab 

9) Look for HP Printer driver. If you see it Click on it and click Remove at the bottom 

10) Select Ok 

11) Select Apply and Ok on the Print Server Properties windows 

12) Close Devices and Printers.

Use this link to download and install the new driver. Configure the printer and try printing.

I hope this helps! Keep me posted. 

Please click “Accepted Solution” if you feel my post solved your issue, it will help others find the solution. Click the “Kudos/Thumbs Up" on the bottom right to say “Thanks” for helping!