HD 303 XL not original

[Diego1962]

HP ENVY Photo 6230.

Ho istallato una cartuccia 303XL compatibile (non originale) ma la stampante fornisce messaggio di errore.

[sandytechy20]

@Diego1962

  Thank you for visiting our English HP Support Forum. We are only able to reply to posts written in English. To ensure a quick response it would be advisable to post your question in English. The following links are here to assist you if you prefer to post in the following Language Forum. German: http://h30492.www3.hp.com/ Spanish: http://h30467.www3.hp.com/ French: http://h30478.www3.hp.com/ Portuguese: http://h30487.www3.hp.com/ Chinese: http://h30471.www3.hp.com/t5/community/communitypage Korean: http://h30491.www3.hp.com/t5/community/communitypage Thank you for your understanding

[Diego1962]

HP ENVY Photo 6230.
I installed a compatible (non-original) 303XL cartridge but the printer gives an error message.

[sandytechy20]

@Diego1962

Welcome to HP support community.

Clean the electrical contacts

1. Turn the printer on.

2. Open the door to access the cartridges.

3. Wait until the carriage stops moving before you continue.

4. Remove the cartridge indicated in the error message from its slot, holding it by its side.

      CAUTION: 

   Do not touch the copper-colored contacts or the ink nozzles. Touching these parts can result in clogs, ink failure, and bad electrical connections.

5. Remove any protective tape that still might be on the contacts.

      CAUTION: 

   Do not touch or try to remove the copper electrical strip.

   

6. Lightly dampen a lint-free cloth with distilled water, and then clean only the copper-colored contacts on the cartridge.

   

7. Lightly dampen a lint-free cloth with distilled water, and then clean the electrical contacts in the carriage, located inside the printer.

   

8. Wait 10 minutes for the contacts to dry.

9. Reinsert the cartridge.

   • Insert the black cartridge into the right slot.

   • Insert the tri-color cartridge into the left slot.

10. Repeat these steps for the other cartridge, if necessary.

11. Close the cartridge access door.

12. If the error persists, repeat the previous steps to clean the cartridge and carriage contacts a second time.

13. Check for the error message.

You can refer this HP document for more assistance:- Click here

I hope that helps.

To thank me for my efforts to help you, please mark my post as an accepted solution so that it benefits several others.

Cheers.