HP 4654 Printer issue

[Geeth]

Hi,

Getting the bleow error when I turn on the printer.

Error code

0x83C0002B

NOS_LOADER_APP

[Kumar0307]

@Geeth

Welcome to the HP Support Community!

Power resetting the printer and updating the printer firmware may resolve this issue. Let us try these steps: 

Step 1: Reset the printer

1. With the printer turned on, disconnect the power cord from the rear of the printer.

2. Wait at least 60 seconds.

3. Reconnect the power cord to the rear of the printer.

4. Turn ON the printer, if it does not automatically turn on.

5. Wait until the printer is idle and silent before you proceed.

Note: HP recommends connecting the printer directly to a wall outlet rather than a surge protector or a power strip.

Step 2: Update the printer firmware

Click here to download and install the latest firmware from your computer.

Click here to know different methods of updating printer firmware.

Step 3: Turn off IPv6

1. From the home screen on the printer control panel, swipe the display to the left, and then touch Setup.

2. Touch Network Setup, and then touch Advanced Settings.

3. Turn off IPv6, and then touch Yes to confirm.

Let me know how this goes.

Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution. Click the “Kudos/Thumbs Up" on the bottom right to say “Thanks” for helping!

[Geeth]

 Hi,

Have tried the Step1 numerous times and doesn't work.

with the error displaying step2 and 3 isn't possible

---

@Kumar0307 wrote:

@Geeth

Welcome to the HP Support Community!

Power resetting the printer and updating the printer firmware may resolve this issue. Let us try these steps: 

Step 1: Reset the printer

1. With the printer turned on, disconnect the power cord from the rear of the printer.

2. Wait at least 60 seconds.

3. Reconnect the power cord to the rear of the printer.

4. Turn ON the printer, if it does not automatically turn on.

5. Wait until the printer is idle and silent before you proceed.

Note: HP recommends connecting the printer directly to a wall outlet rather than a surge protector or a power strip.

Step 2: Update the printer firmware

Click here to download and install the latest firmware from your computer.

Click here to know different methods of updating printer firmware.

Step 3: Turn off IPv6

1. From the home screen on the printer control panel, swipe the display to the left, and then touch Setup.

2. Touch Network Setup, and then touch Advanced Settings.

3. Turn off IPv6, and then touch Yes to confirm.

Let me know how this goes.

Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution. Click the “Kudos/Thumbs Up" on the bottom right to say “Thanks” for helping!

---

---

@Kumar0307 wrote:

@Geeth

Welcome to the HP Support Community!

Power resetting the printer and updating the printer firmware may resolve this issue. Let us try these steps: 

Step 1: Reset the printer

1. With the printer turned on, disconnect the power cord from the rear of the printer.

2. Wait at least 60 seconds.

3. Reconnect the power cord to the rear of the printer.

4. Turn ON the printer, if it does not automatically turn on.

5. Wait until the printer is idle and silent before you proceed.

Note: HP recommends connecting the printer directly to a wall outlet rather than a surge protector or a power strip.

Step 2: Update the printer firmware

Click here to download and install the latest firmware from your computer.

Click here to know different methods of updating printer firmware.

Step 3: Turn off IPv6

1. From the home screen on the printer control panel, swipe the display to the left, and then touch Setup.

2. Touch Network Setup, and then touch Advanced Settings.

3. Turn off IPv6, and then touch Yes to confirm.

Let me know how this goes.

Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution. Click the “Kudos/Thumbs Up" on the bottom right to say “Thanks” for helping!

---

[Kumar0307]

@Geeth

If you are not able to bypass the error and the issue still persists, please contact our HP Support team for Service Options as it could be a possible hardware issue:

1) Click on this link - https://support.hp.com/us-en/contact-hp?openCLC=true

2) Select your product type below.

3) Enter the serial of your device.

4) Select the country from the drop-down.

5) Select the appropriate option based on your preference.

6) Fill the web-form and proceed further.

Keep me posted for any other assistance.

Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution. Click the “Kudos/Thumbs Up" on the bottom right to say “Thanks” for helping!