HP 6970 streaking

[Bwatkins2]

My Hp 6970 is still leaving streaks even after performing the recommended “align cartridge”, “clean print head (1-3)”, and running the “print diagnostics”. See photos

[Raj1788]

@Bwatkins2

I suggest you do a Hard Reset on the printer

(1) Turn the printer on, if it is not already on.

(2) Wait until the printer is idle and silent before you continue.

(3) With the printer turned on, disconnect the power cord from the rear of the printer.

(4) Unplug the power cord from the wall outlet.

(5) Wait at least 60 seconds.

(6) Plug the power cord back into the wall outlet.

NOTE: HP recommends connecting the printer power cord directly to the wall outlet.

(7) Reconnect the power cord to the rear of the printer.

(8) Turn on the printer, if it does not automatically turn on.

The printer might go through a warm-up period. The printer lights might flash, and the carriage might move.

Wait until the warm-up period finishes and your printer is idle and silent before you proceed.

Clean the ink cartridge and printhead contacts

Remove the ink cartridges to clean the ink cartridge and printhead contacts and then reinstall the ink cartridges into the printer.

   CAUTION: 

Clean the ink cartridges one at a time. Do not leave an ink cartridge outside of the printer for more than 30 minutes. Also, never turn off the printer when an ink cartridge is removed from its slot. Leaving ink cartridge slots empty might cause damage to the ink cartridge ink system.

1. Gather the following materials:

   • A clean, lint-free cloth

   • A clean, dry cotton swab

   • Distilled or bottled water

        CAUTION: 

     Do not use tap water, platen cleaners, or alcohol because they might contain contaminants that can damage the contacts.

2. Open the ink cartridge access door.

   The carriage moves to the left side of the printer.

   NOTE: 

   If the scanner lid is open, the ink cartridge access door does not open.

   

3. Wait until the printer is idle and silent before you proceed.

4. Press the tab inward on the front of the ink cartridge to release it, and then pull up on the ink cartridge to remove it from the slot.

   

5. Lightly dampen a clean, lint-free cloth with bottled or distilled water.

   

6. Place the cartridge to the side, with the contacts facing upwards.

7. Moisten the cotton swab, and then wipe the contacts inside the printhead.

   

8. Carefully reinsert the ink cartridge into its slot, and then press down on the ink cartridge until it clicks into place.

   

   NOTE: 

   Make sure you insert the ink cartridge into the slot that has the same colored letter as the color you are installing.

9. Repeat these steps for other ink cartridges, if necessary.

10. Close the ink cartridge access door.

    

Try to print. 

Keep me posted, how it goes!

If the information I've provided was helpful, give us some reinforcement by clicking the Accepted Solution and Kudos buttons, that'll help us and others see that we've got the answers!

Thank you for joining the HP Community.

Have a great day!

Cheers:)