HP 7000 e809a doesn't print after Windows 10 update

[katydid2]

After a large update for Windows 10 my 7000 e809a printer doesn't print--sends it to the spooler, but does nothing.  I have run the diagnostics, and everything seems to be fine; also turned the spooler off and then on.  Prior to the update it was working just fine.  Thank you for your help.

[Jeet_singh · Accepted solution]

Hi @katydid2,

Thank you for showing your interest in HP Support Forums. It is a great place to find the help you need, from other users, HP experts, and other support personnel. I came across your post and wanted to assist you. I see from the post that you are having issues with printing on your HP OfficeJet printer after the recent Windows 10 update. Don't worry as I have a few suggestions which should help you resolve this issue.

Let's start off by performing a Hard reset on the printer and make sure that the printer is connected directly to the wall outlet and not to the surge protector.

With the printer turned on, disconnect the power cord from the rear of the printer and also unplug the power cord from the wall outlet.

Remove USB cable, if present.

Wait for 2-3 minutes, press and hold the power button on your printer for about 30 seconds to remove any additional charge.

Now plug back the power cable straight to a wall outlet without any surge protector or an extension cord and then plug back the power cord to the printer.

Turn on the printer and wait till warm-up period finishes and the printer is idle.

Let's try these steps to Uninstall and Reinstall the printer drivers:

1.) In Windows, search for and open Programs and features

2.) Select your HP Printer

3.) Select Uninstall

4.) In Windows, search for and open Devices and printers

5.) In the Devices and Printers windows look for your HP printer. If you see it listed right-click on it and choose 'Delete' or 'Remove Device'

6.) Open up the run command with the "Windows key + R" key combo.

7.) Type printui.exe /s and click Ok. (Note: there is a space in between “printui.exe” and “/s”)

8.) Click on the "Drivers" tab

9.) Look for HP Printer driver. If you see it Click on it and click Remove at the bottom

10.) Select Ok

11.) Select Apply and Ok on the Print Server Properties windows

12.) Close Devices and Printers

13 ). Restart the PC

14 ). Now click on this link: http://ftp.hp.com/pub/softlib/software12/COL31335/bi-110073-2/OJ_SF_7000E_Full_Win_WW_140_408-4.exe and install the updated printer drivers

15 ). Connect the USB cable only when prompted and follow the on-screen instructions to complete the setup.

Let me know if those steps worked for you.

If they did, that’s awesome!

Give us some reinforcement by clicking the solution and kudos buttons,

That’ll help us and others see that we’ve got the answers!

Good Luck.

[katydid2]

Thank you for your assistance.  My printer is now up and working!