HP ENVY 7640 will not pull photo paper into the printer? Will pull regular paper. How to fix this?

[Spacelady]

HP ENVY 7640 will not pull glossy photo paper from the paper tray into the printer? It will pull regular paper. How to fix this? Thanks

[Raj1788]

@Spacelady

Thank you for joining HP Forums.

It's a pleasure assisting you in finding answers to your technical queries.

To provide you with an accurate solution, I'll need a few more details:

Did you try with a different photo paper?

Make sure there are multiple papers in the photo tray.

What is the make of the photo paper?

To resolve the issue, confirm the print settings in the photo app you are using, such as selecting the photo paper tray, paper type, and paper size are set for your print job.

Step 1: Load photo paper in the photo tray

Load photo paper in the photo paper tray to help ensure that it is picked up by the printer correctly.

1. Turn the printer on if it is not already on.

2. Pull the photo tray inside the input tray toward you to open it as far as possible.

   NOTE: 

   If you do not see the photo tray inside the input tray, remove the output tray, and then open the photo tray.

   Figure : Pull out the photo tray inside the input tray

   

3. Slide the paper width guides to their outermost positions.

   Figure : Slide the paper-width guides to their outermost positions

   

4. Load the photo paper with the short edge forward and the print side down into the photo tray.

   NOTE: 

   For photo paper with a perforated tab, load the paper in the tray print-side down with the perforated tab closest to you.

   Figure : Load photo paper in the paper tray with the print side down

   

5. Slide the paper forward until it stops.

   NOTE: 

   Make sure that the stack of photo paper is not higher than the top edges of the paper width guides.

6. Slide the paper width guides inward so that they lightly rest against the edges of the photo paper and make sure that the photo paper is centered in the tray.

   Figure : Adjust the paper-width guides

   

7. Reinstall the output tray on the input tray, if you removed it, and then push the input tray into the printer until it locks into place.

Update the firmware for the printer using this link: https://support.hp.com/in-en/product/hp-envy-7640-e-all-in-one-printer-series/6617267/document/c0291...

Restart the printer.

Keep me posted, how it goes!

If the information I've provided was helpful, give us some reinforcement by clicking the Accepted Solution and Kudos buttons, that'll help us and others see that we've got the answers!

Have a great day!

Cheers:)