HP Envy Inspire

[DJONES3209]

HP ENVY printer 

stuck with a code error DD016C50- need directions on how to unlock screen so I can print again

[Nal_NR]

Hi @DJONES3209,

Welcome to the HP Support Community. 

I'd be glad to help you! 

To be able to answer you effectively, we need some information.

May I have the exact name and product number of the unit? Do not share any of your personal information such as serial, phone number, email ID, etc.

Meanwhile, try the steps below. 

Please make sure that the printer is connected directly to the wall outlet and not to the surge protector.

Remove all the ink cartridges and then try to perform a hard reset on the printer.

With the printer turned on, disconnect the power cord from the rear of the printer and also unplug the power cord from the wall outlet.

Remove USB cable, if present.

 Wait for 2-3 minutes, press and hold the power button on your printer for about 30 seconds to remove any additional charge.

 Now plug back the power cable straight to a wall outlet without any surge protector or an extension cord and then plug back the power cord to the printer.

Turn on the printer and wait till warm-up period finishes and the printer is idle.

 Now insert the ink cartridges and then try to print a test page and check if it works.

Let’s first try and make a “photocopy” to determine whether the issue is with the printer or not. Place a document on the scanner glass and choose “Copy” option. If the printer is making a good copy, then the printer hardware is fine.

Since the printer is working fine on your laptop and phone, this means printer hardware is fine, it has to do with the computer itself,

I would suggest you go ahead and uninstall the printer and then install the full-feature software from the support website.

Let's try these steps here:

1.) In Windows, search for and open Programs and features

2.) Select your HP Printer

3.) Select Uninstall

4.) In Windows, search for and open Devices and printers

5.) In the Devices and Printers windows look for your HP printer. If you see it listed right-click on it and choose 'Delete' or 'Remove Device'

6.) Open up the run command with the "Windows key + R" key combo.

7.) Type printui.exe /s and click Ok. (Note: there is a space in between “printui.exe” and “/s”)

8.) Click on the "Drivers" tab

9.) Look for HP Printer driver. If you see it Click on it and click Remove at the bottom

10.) Select Ok

11.) Select Apply and Ok on the Print Server Properties windows

12.) Close Devices and Printers

13.) Restart the PC

Now download and install the full-feature software, Click here

Hope this helps! Keep me posted for further assistance

Please mark this post as “Accepted Solution” if the issue is resolved and if you feel this reply was helpful click “Yes”.

[Nal_NR]

Hi @DJONES3209,

Kindly perform all the steps mentioned above and keep me posted.