HP Envy Photo 7155 printing bizarre colors

[DogTrainerInAK]

I bought the printer yesterday and the first photo I printed looked great but I needed to print the same photo again and the second version looked nothing like the first - the colors were just bizarre! I re-printed that photo a half a dozen times and every one of them had the same bizarre colors. I was printing on fabric (for a sewing project) with the "Other matte paper" setting so I thought it was the paper that was causing the problem. i switched to glossy photo paper (and setting) and got the same bad result so I gave up. The next morning I tried again with the fabric and the colors looked like they were supposed to! In that case I had left the paper type as "Plain paper" so I printed with that setting on fabric a few more times. Only the first one had normal colors and the rest of them had wacky colors. I did also print a different picture on plain paper and that was fine the first time but not the second. Anyone have this problem? Any solution??

[sandytechy20]

@DogTrainerInAK

Welcome to HP support community.

Manually clean the area around the ink nozzles

1. Gather the following materials:

   • A clean, lint-free cloth or a clean, dry cotton swab

   • Distilled or bottled water

        CAUTION: 

     Do not use tap water because it might contain contaminants that can damage the printhead.

2. Open the ink cartridge access door.

   

3. Wait until the printer is idle and silent before you continue.

4. Lightly press down on the ink cartridge to release it, and then pull the ink cartridge out of its slot.

   

      CAUTION: 

   Do not remove both ink cartridges at the same time. Remove and then clean each ink cartridge one at a time. Do not leave an ink cartridge outside the printer for more than 30 minutes.

5. Hold the ink cartridge by its sides.

   

6. Lightly dampen a clean, lint-free cloth or swab with bottled or distilled water.

7. Clean the face and edges around the ink nozzle with the cloth or swab.

      CAUTION: 

   Do not clean the ink nozzle plate.

   

   1. Nozzle plate - Do not clean

   2. Area surrounding ink nozzle - Do clean

   3. Ink cartridge contacts - Do not clean

8. Wait 10 minutes for the cleaned area to dry before you continue.

9. Hold the ink cartridge by its sides with the contacts toward the printer, insert the ink cartridge into its slot, and then gently push the ink cartridge until it snaps into place.

   

10. Repeat these steps to clean around the nozzles on the other ink cartridge.

11. Close the ink cartridge access door.

You can refer this HP document for more assistance:-  Click here

Let me know how it goes.

To thank me for my efforts to help you, please mark my post as an accepted solution so that it benefits several others.

Cheers.