HP Envy Pro 6400 E3 error

[Colin151]

I keep getting the error, I've followed all of the instructions and nothing is working, still getting the error. Of COURSE, it's out of warranty so I can't talk to anyone except this forum. Any tips other than throwing this POS out the window?

[rachelgomez1619]

During a print job, the ink cartridge carriage stalls in the printer, and a Carriage Jam or E3 error displays on the printer control panel.

Perform the following tasks in the order given. Use the printer after each task to see if the issue is resolved.

Check for obstructions in the carriage path

Remove any loose paper or obstructions that might be blocking the carriage path.

Turn off the printer, and then disconnect the power cord.

Open the cartridge access door to get to the carriage inside the printer.

Examples of printer door locations
Look for and remove any obstructions in the carriage path, such as crumpled paper or dislodged labels.

EXAMPLE OF A PRINTER WITH AN OBSTRUCTION IN THE CARRIAGE PATH

Example of a printer with paper debris in the carriage path
If the carriage has a latch, gently press it down to make sure it is locked into place.

CAUTION: Ink tank printers: If the carriage latch is secured, do not press down on it. Doing so might damage the printer.
EXAMPLES OF THE CARRIAGE LATCH

Example of the carriage latches
If the carriage is not locked in place, move it to each side, removing any obstructions blocking its path.

CAUTION: Do not force the carriage to move if it is locked or stuck. This can damage the printer.
Close the printer door.

Reconnect the power cord, and then turn on the printer.

Reset the printer
Reset the printer to recover from printer errors or failures.

If your printer has a rechargeable battery, remove it.

With the printer turned on, disconnect the power cord from the printer.

Unplug the power cord from the power source.

Wait 60 seconds.

Reconnect the power cord to a wall outlet and to the printer.

Turn on the printer to complete the reset.

Service the printer
Service or replace your HP product if the issue persists after completing all the preceding steps.

Go to Contact HP Customer Support to schedule a product repair or replacement. If you are in Asia Pacific, you will be directed to a local service center in your area.

To confirm your warranty status, go to HP Product Warranty Check. Repair fees might apply for out-of-warranty products.

Regards,

Rachel Gomez