HP Officejet Pro 8610 Cyan Ink Cartridge is New and the Printer Says that it is Damage or Missing.

[ccarrasq]

HP Officejet Pro 8610 Cyan Ink Cartridge is New and the Printer Says that it is Damage or Missing. Connectors for the cartridge are in good condition and every dirt or ink was removed from the feeder.

Does anyone knows how to fix this problem?

[Jay_G24]

Hi @ccarrasq,

I'd like to help with the cartridge error!

Please try suggestions-

Reset the product

• With the printer turned on, disconnect the power cord from the rear of the printer.
• Unplug the power cord from the wall outlet.
• Wait at least 60 seconds.
• Plug the power cord back into the wall outlet.
• Reconnect the power cord to the printer.
• Turn the printer on. HP recommends plugging the printer directly into a wall outlet.

Clean the cartridge contacts

Remove the cartridge indicated by the error message, clean the electrical contacts, and then reinsert the cartridge in its color-coded slot.

1. Turn the printer on.

2. Open the door to access to the cartridges.

3. Wait until the carriage stops moving before you continue.

4. Push in on the front of the cartridge indicated in the error message, and then remove it.

   

5. Wipe the electrical contact on the cartridge with a lint-free cloth.

   

6. Insert the cartridge into its color-coded slot until it snaps into place.

   

7. Repeat these steps for any other cartridges indicated in the error message.

8. Close the cartridge access door.

Hope this helps! Keep me posted. 

And, Welcome to the HP Support Community. 

Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.

Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping