HP ink Tank wireless 410

[Tareq3]

Dears

I got new HP ink Tank wireless 410 printer , but there is a beep sound continuously. It prints fine but the moment it finishes it continues beeping, even if just powered on.

regards 

[The_Fossette]

@Tareq3,

Welcome to the HP Forums!

Thank you for posting your query on this forum, it's a great place to find answers.

Don’t worry, I assure you I will try my best to get this sorted.

I recommend you follow the below steps and check whether the issue is resolved.

1.With the printer turned on, disconnect the power cord from the rear of the printer and also unplug the power cord from the wall outlet.

2.Remove USB cable, if present.

3.Wait for 2-3 minutes, press and hold the power button on your printer for about 30 seconds to remove any additional charge.

4.Now plug back the power cable straight to a wall outlet without any surge protector or an extension cord (This is important) and then plug back the power cord to the printer.

5.Turn on the printer and wait till warm-up period finishes and the printer is idle.

If you continue facing the issue, I recommend you follow the steps in the below article and update the printer firmware and check whether the issue is resolved.

https://support.hp.com/us-en/document/c02919168

Let me know how it goes and you have a great day!

If you wish to show appreciation for my efforts, mark my post as Accept as Solution. Your feedback counts!

Cheers!