High contrast in photos

[sylwiagallagher]

Helo!

First, I printed a photo used photoshop in RGBs, it came out too brown and the white shirt looked blue. Then I used your Hp photo creations program, the picture was even worse, not counting the lines, the photo has a double contrast than the original.

[sylwiagallagher]

Does anyone intend to answer me? As you can see on the pictures, the first is a printout scan, the second is a photo in jpg - the colors do not match? Is the device fault or bad settings?

[Raj1788]

@sylwiagallagher

Welcome to the HP Community

Are you facing the same while making a copy?

Did you try to print from a different application?

I suggest you do a Hard Reset on the printer

(1) Turn the printer on, if it is not already on.

(2) Wait until the printer is idle and silent before you continue.

(3) With the printer turned on, disconnect the power cord from the rear of the printer.

(4) Unplug the power cord from the wall outlet.

(5) Wait at least 60 seconds.

(6) Plug the power cord back into the wall outlet.

NOTE: HP recommends connecting the printer power cord directly to the wall outlet.

(7) Reconnect the power cord to the rear of the printer.

(8) Turn on the printer, if it does not automatically turn on.

The printer might go through a warm-up period. The printer lights might flash, and the carriage might move.

Wait until the warm-up period finishes and your printer is idle and silent before you proceed.

Manually clean the area around the ink nozzles

1. Gather the following materials:

   • A clean, lint-free cloth or a clean, dry cotton swab

   • Distilled or bottled water

        CAUTION: 

     Do not use tap water because it might contain contaminants that can damage the printhead.

2. Open the ink cartridge access door.

   

3. Wait until the printer is idle and silent before you continue.

4. Lightly press down on the ink cartridge to release it, and then pull the ink cartridge out of its slot.

   

      CAUTION: 

   Do not remove both ink cartridges at the same time. Remove and then clean each ink cartridge one at a time. Do not leave an ink cartridge outside the printer for more than 30 minutes.

5. Hold the ink cartridge by its sides.

   

6. Lightly dampen a clean, lint-free cloth or swab with bottled or distilled water.

7. Clean the face and edges around the ink nozzle with the cloth or swab.

      CAUTION: 

   Do not clean the ink nozzle plate.
   

   1. Nozzle plate - Do not clean

   2. Area surrounding ink nozzle - Do clean

   3. Ink cartridge contacts - Do not clean

8. Wait 10 minutes for the cleaned area to dry before you continue.

9. Hold the ink cartridge by its sides with the contacts toward the printer, insert the ink cartridge into its slot, and then gently push the ink cartridge until it snaps into place.

   

10. Repeat these steps to clean around the nozzles on the other ink cartridge.

11. Close the ink cartridge access door.

Try to print.

Refer to this Document: https://support.hp.com/in-en/product/hp-envy-photo-7100-all-in-one-printer-series/9073119/model/1649... Black or Color Ink Not Printing, Other Print Quality Issues.

Keep me posted, how it goes!

If the information I've provided was helpful, give us some reinforcement by clicking the Accepted Solution and Kudos buttons, that'll help us and others see that we've got the answers!

Have a great day!

Cheers:)