How do i change HP Deskjet 2775 from Spanish to English

[ChrisannF]

I bought this printer from a store in Jamaica, everything came in Spanish not sure what to do.

[Betty0610]

@ChrisannF

Welcome to the HP Support Community.

Use an Internet browser to open the Embedded Web Server (EWS), and then change the language setting. The EWS is available only for printers that are set up on a wired (Ethernet) or wireless network.

1. Print a Network Configuration Page.

   1. On the printer control panel, swipe the display to the left, and then touch Setup.

   2. Touch Tools.

   3. Swipe up on the display, and then touch Network Configuration Report.

      A Network Configuration Page prints.

      Figure : Example of a Network Configuration Page

      

2. On the Network Configuration Page, find URL for the embedded web server.

   Figure : Example of the EWS URL on the Network Configuration Page

   

3. From a computer connected to your network, type the entire URL into an Internet browser. If the webpage remains blank, try a different Internet browser.

4. In the EWS, click the Settings tab.

5. Click Preferences, and then click International.

6. Under Control Panel Language, select the desired control panel language.

   Figure : Example of the Control Panel Language Selection

   

7. Click Apply, wait until the changes are confirmed, and then close the EWS.

8. Turn your printer off and then on.

Let me know if this helps.

If the information I've provided was helpful, give us some reinforcement by clicking the Accepted Solution and Kudos buttons, that'll help us and others see that we've got the answers!

Thanks!

Have a great day!

[The1stRickster]

I had the same question, but no, it did not help me. The reason I wanted it switched to English is to set up the network. And the 2775 printer does not have a display like the one you are mentioning.

[Betty0610]

@The1stRickster

Welcome to the HP Support Community.

This is not the display of the Printer. It's the printers web page.

Let us know if you need any help.

Thanks 🙂