Hp 5200 printer is off line When I go to print tells me I have to save the doc and it doesnt print

[Maria608]

My Pinter HP Jet 5200 series is not printer from my computer.  I installed and uninstalled it.  When I go to print it shows that I need to save the document.  I save it and it still does not print. It says that it is offline, but   I can print from my iPhone .  

Does nayone have a solution to this issue?

thanks

Maria

[Jay_G24]

 Hi @Maria608,

Welcome to the HP Support Community

I'd like to help with the printer connectivity issue.

To assist better -

Could you share an image of the screen that shows up the save option?

Try the below suggestions -

 Use HP Print and Scan Doctor to check connectivity

Download a special version of HP Print and Scan Doctor specifically created to help with printer offline conditions.

1. Download HP Print and Scan Doctor.
2. Run HPPSdr.exe from the download location on your computer.
3. Once HP Print and Scan Doctor opens, click Start, and then select your printer.
   • If your printer in not in the list, turn it off and on, and then click Retry.
   • If there is a connection problem, follow the instructions in HP Print and Scan Doctor.
4. If a screen prompts you to turn on printer updates, click Yes.
5. If a screen prompts you to make your printer the default printer, click Yes.

Set a manual IP-

To set a manual IP and try the steps below -

--->Touch on the wifi icon ((i)) on the printer, and take down the IP address 

--->Open a web browser (ex Chrome or Mozilla) and type in the printer's IP

--->then go to network ---> general ---> network protocols ---> select IPV4 only-->apply 

--->go to wireless ---> wireless 802.11---> select manual ip ---> apply

--->Enter 8.8.8.8 for the first DNS and 8.8.4.4 for the second DNS.  

--->then go to settings on the main ews page --> power management ---> select sleep mode to max 15min

 Connect the printer to TCP/IP port

 --->Touch on the wifi icon ((i)) on the printer, and take down the IP address 

a. Click Start/Devices and Printers.  Right-click on your HP Printer.  Select Printer Properties.  Select the Ports tab at the top.

b.    Select Add Port.  Select Standard TCP/IP Port.  Select New Port.

c.    Follow the Add Port Wizard.  Under Printer Name or IP Address, .  Example:  192.168.1.15.  The IP address will be copied under Port Name.  

d.    Select Next and Finish the Wizard.

Hope this helps! Keep me posted. 

Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.

Click the “Yes" on the bottom right to say “Thanks” for helping