I can't printer anything

[Johnandlaura]

There's an orange light on my printer. Keeps flashing with an envelope and I cannot get it off. It won't let me print anything 

[Nal_NR]

Hi @Johnandlaura,

Welcome to the HP Support Community. 

I'd like to help!

I suggest you do a Hard Reset on the printer and update the firmware for the printer.

(1) Turn the printer on, if it is not already on.

(2) Wait until the printer is idle and silent before you continue.

(3) With the printer turned on, disconnect the power cord from the rear of the printer.

(4) Unplug the power cord from the wall outlet.

(5) Wait at least 60 seconds.

(6) Plug the power cord back into the wall outlet.

NOTE: HP recommends connecting the printer power cord directly to the wall outlet.

(7) Reconnect the power cord to the rear of the printer.

(8) Turn on the printer, if it does not automatically turn on.

The printer might go through a warm-up period. The printer lights might flash, and the carriage might move.

Wait until the warm-up period finishes and your printer is idle and silent before you proceed.

Click here: https://support.hp.com/ph-en/product/hp-deskjet-d2600-printer-series/3742933/document/c02919168 for Updating or Upgrading Printer Firmware

Restart the printer.

Refer to this document: https://support.hp.com/ph-en/product/hp-deskjet-d2600-printer-series/3742933/document/c01673697 for Blinking Lights on the HP Deskjet D2600 Printer.

Keep me posted, on how it goes!

Please click “Accepted Solution” if you feel my post solved your issue, it will help others find the solution. Click the “Kudos/Thumbs Up" on the bottom right to say “Thanks” for helping!