Inkjet 4515 error code C4EBA341

[C4EBA]

Sir , Printer is not working at all always when I start it is showing error code C4EBA341 with blue screen.

[Kumar0307]

@C4EBA

Welcome to the HP Support Community!

This error refers to a possible hardware issue with the printer. Let us try these steps:

Step 1: Reset the printer

1. With the printer turned on, disconnect the power cord from the rear of the printer.

2. Wait at least 60 seconds.

3. Reconnect the power cord to the rear of the printer.

4. Turn ON the printer, if it does not automatically turn on.

5. Wait until the printer is idle and silent before you proceed.

Note: HP recommends connecting the printer directly to a wall outlet rather than a surge protector or a power strip.

Step 2: Check for any paper jams

Perform steps mentioned in this document.

Also, check if the print carriage moves freely.

Step 3: Re-insert the ink cartridges

Step 4: Try to make a copy/print

Let me know how this goes.

If you feel my post solved your issue, please click “Accept as Solution”, it will help others find the solution. Click the “Kudos/Thumbs Up" on the bottom right to say “Thanks” for helping!