Installation: HP LaserJet Pro MFP M132nw control panel screen not showing anything, keeps flickering

[Nirupam2020]

I was trying to install my newly purchased HP LaserJet Pro MFP M132nw printer. But when I switched it on the 2 line control panel screen on the printer is showing nothing and the screen is flickering. What should I do?

[Betty0610]

@Nirupam2020

Welcome to the HP Support Community.

Let's try to reset the Printer here:

Reset the product

• With the printer turned on, disconnect the power cord from the rear of the printer.
• Unplug the power cord from the wall outlet.
• Wait at least 60 seconds.
• Plug the power cord back into the wall outlet.
• Reconnect the power cord to the printer.
• Turn the printer on. HP recommends plugging the printer directly into a wall outlet.

Also, try connecting the Printer to a different wall outlet directly.

Let's try a firmware update: https://support.hp.com/in-en/document/c02919168

Let me know if this helps.

If the information I've provided was helpful, give us some reinforcement by clicking the "Accept as solution" button, that'll help us and others see that we've got the answers!

Thanks!

Have a great day!

[Nirupam2020]

It didn't help. Kindly send me a technician asap. My work is suffering due to it.

[TEJ1602]

@Nirupam2020

Sending a technician may not be possible. Please reach out to the HP Support in your region regarding the service options for your printer.

Hope this helps!

Please click “Accepted Solution” if you feel my post solved your issue, it will help others find the solution. Click the “Kudos/Thumbs Up" on the bottom right to say “Thanks” for helping!