My printer is only printing in a green tint

[bibobibo]

Every now and then,  my printer will start printing in a green tint. Not always but just sometimes. And normally it stops but today it wouldn't. I tried to do a quality check and the magenta and light magenta are not there. The arrow at the bottom is yellow instead of red and the rectangle is barely there. I tried changing the cartridges but to genuine HP cartridges but nothing changes. I also tried aligning the printer and that came out fine but it continues to print in green. I also tried cleaning the cartridges up to 3rd level cleaning. What is wrong? CAN SOMEONE PLEASSEEEE HELP MEEEEEEEE

[A4Apollo]

Hi! @bibobibo, Thanks for stopping by the HP Support Forums!

I understand when you when you print from your printer the printer is printing a green tint

Don't worry I'll try to help you out.

Did you make any changes to your printer?

Have you tried checking with a different ink cartridge?

Does the issue persist when you make a copy from your printer?

Have you tried printing from a different application? Does the issue persist?

Please share the operating system you are running on your PC to assist you better.

Replace low, empty or faulty ink cartridges on your printer.

Try printing a Print Quality Diagnostic report and check if the issue persists.

If the copy works fine uninstall the printer software from root level on your PC and install the full feature printer software and check if it helps. (Windows Only)

In Windows, search for and open Programs and Features.

Select your HP printer.

Select Uninstall.

In Windows, search for and open Devices and Printers.

In the Devices and Printers window look for your HP Printer. If you see it listed, right-click on it and choose "Delete" or "Remove Device.”

Open up the run command with the "Windows Key + R" key combo.

Type printui.exe /s and click OK.

Click on Drivers tab.

Look for HP Printer driver. If you see it click on it and click remove at the bottom.

Select OK.

Select Apply and OK on the Print Server Properties windows.

Close Devices and Printers.

Update the full feature printer software using this link. Click Here

Also, Try the steps recommended below.

Align the printer

Aligning the ink cartridges correctly aligns the printhead with the printer. Align the printer from the printer control panel, and then evaluate the results.

1. Make sure to load the input tray with plain, white paper.

2. On the printer control panel, swipe the display to the left, and then touch Setup.

   The Setup menu displays.

3. Touch Tools, and then touch Align Printer.

   An alignment page prints.

4. Wait for the alignment page to finish printing.

Refer this article to further troubleshoot print quality issues with your printer. Click Here

Let me know if this helps!

Have a wonderful day ahead! 🙂

Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.

Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!