NOT PRINTING

[RWS711]

Hi Everyone, I am having issues with my HP officejet Pro 6978 , connected wirelessly, to print. Was fine 4 days ago. Then I struggled for 2 days and the Print and Scan Doc told me that since a test page would not print, but an Internal test page did, that is was a software problem. I followed directions to uninstall the software and reinstall the April 2019 update on software, and it worked perfectly. I was thrilled....until this morning when I turned everything back on and I am back at square one...only Internal test page working. 

Frustration mounting as this waste of time...Any help would be appreciated, thanks.

[The_Fossette]

@RWS711,

Welcome to the HP Support Community!

Follow the below steps and check if it helps.

1. With the printer turned on, disconnect the power cord from the rear of the printer and also unplug the power cord from the wall outlet. 
2. Remove USB cable, if present. 
3. Wait for 2-3 minutes, press and hold the power button on your printer for about 30 seconds to remove any additional charge. 
4. Now plug back the power cable straight to a wall outlet without any surge protector or an extension cord (This is important) and then plug back the power cord to the printer. 
5. Turn on the printer and wait till warm-up period finishes and the printer is idle.

If you continue facing the issue, then I recommend you root uninstall the printer and then reinstall it and check if it helps.

Here is how it is done.

1.) In Windows, search for and open Programs and features

2.) Select your HP Printer

3.) Select Uninstall

4.) In Windows, search for and open Devices and printers

5.) In the Devices and Printers windows look for your HP printer. If you see it listed right-click on it and choose 'Delete' or 'Remove Device'

6.) Open up the run command with the "Windows key + R" key combo.

7.) Type printui.exe /s and click Ok. (Note: there is a space in between “printui.exe” and “/s”)

8.) Click on the "Drivers" tab

9.) Look for HP Printer driver. If you see it Click on it and click Remove at the bottom

10.) Select Ok

11.) Select Apply and Ok on the Print Server Properties windows

12.) Close Devices and Printers

13.) Restart the PC

14.) Download and install the printer software from the below link.

http://hp.care/2nikIQ9

Let me know how it goes and you have a great day!

If you wish to show appreciation for my efforts, mark my post as Accept as Solution. Your feedback counts!

Cheers!