Need a service manual for the Officejet Pro 8610

[Ike_C]

I need a service manual or parts breakdown page showing how the spring on the stop for the paper tray for the already printed paper should be properly installed.  The spring on my printer paper stop has un-sprung and I need to get it back, but I need to see how it is coiled properly.

[banhien]

@Ike_C

HP does not supply Officejet Pro 8610 Service Manual to public. Only the following manuals

     https://support.hp.com/us-en/product/hp-officejet-pro-8610-e-all-in-one-printer-series/5367603/model...

Regards

[Ike_C]

Thanks for your very quick reply.  I understand that service manuals are not provided normally but I need to look at how the spring for the small flap/stop on the tray that extends when  you are receiving printed forms. The spring has sprung out of position and before messing with it, it would be nice to have an idea of the exact position of the spring once in place properly.  I don't need the entire manual.  This is my printer. 

[Bettlebug]

I need a circuit board schematic

[Bob_Headrick]

---

@Bettlebug wrote:

I need a circuit board schematic

---

As @banhien mentioned HP does not make service manuals (including schematics) available for the Officejet Pro 8610.

What is the issue you are trying to resolve?

[Ike_C]

On my HP 8610, the spring on the plastic paper stop for the outside above the paper tray, when the printed page comes out, it stops the page from flying to the floor.  I need to replace the spring so that the STOP then folds down when I slide the extender shut.