-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
- HP Community
- Printers
- Printing Errors or Lights & Stuck Print Jobs
- Officejet Pro 8100 printer issue

Create an account on the HP Community to personalize your profile and ask a question
10-19-2019 05:08 PM
Installed all new ink cartridges. Now the bars read empty and the color circles underneath just flash. Removed all cartridges and powered of for 10min, nothing changed. Please help.
10-22-2019 07:26 AM
Welcome to the HP Support Community!
I reviewed your post and I understand that you are facing issues printing.
Don’t worry, I assure you I will try my best to get this sorted.
- Are you able to make a copy?
- Are you using HP genuine cartridges?
Meanwhile, I recommend you follow the below steps and check if it helps.
- With the printer turned on, disconnect the power cord from the rear of the printer and also unplug the power cord from the wall outlet.
- Remove USB cable, if present.
- Wait for 2-3 minutes, press and hold the power button on your printer for about 30 seconds to remove any additional charge.
- Now plug back the power cable straight to a wall outlet without any surge protector or an extension cord (This is important) and then plug back the power cord to the printer.
- Turn on the printer and wait till warm-up period finishes and the printer is idle.
If you continue facing the issue, update the printer firmware following the steps in the below article.
https://support.hp.com/us-en/document/c02919168
Let me know how it goes and you have a great day!
If you wish to show appreciation for my efforts, mark my post as Accept as Solution. Your feedback counts!
Cheers!
The_Fossette
I am an HP Employee