-
×InformationWindows update impacting certain printer icons and names. Microsoft is working on a solution.
Click here to learn moreInformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center.
-
×InformationWindows update impacting certain printer icons and names. Microsoft is working on a solution.
Click here to learn moreInformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center.
- HP Community
- Printers
- Printing Errors or Lights & Stuck Print Jobs
- Printer Failure msg
Create an account on the HP Community to personalize your profile and ask a question
01-21-2022 02:07 PM
I get a Printer Failure msg: There is a problem with the printer or ink system. Turn printer off then turn on.....
I have done this several times and have disconnected/reconnected the power cord, to no effect. The msg does not provide an error code. Any suggestions on how to proceed?
Solved! Go to Solution.
Accepted Solutions
01-24-2022 08:27 AM
Hi @RickG4,
I'd like to help!
I understand you are facing a printer failure error.
Try the below suggestions -
Step 1: Check for obstructions in the carriage path
Clear obstructions from the carriage area inside the printer.
-
With the printer on, disconnect the power cord from the rear of the printer.
-
Open the door to access the carriage inside of the printer.
-
Look in the carriage path for debris such as crumpled paper or dislodged labels, and then remove any that you find.
-
Use your hand to move the carriage to each side, making sure it moves freely. If the carriage is stalled or docked to one side of the printer and you cannot move it, continue with these steps.
-
Close the carriage access door.
-
Reconnect the power cord to the rear of the printer, and then turn the printer on.
If the error persists, continue to the next step.
Step 2: Reset the printer
Reset the printer to recover from printer failures.
-
With the printer turned on, disconnect the power cord from the printer.
-
Unplug the power cord from the power source.
-
Wait 60 seconds.
-
Reconnect the power cord to a wall outlet and to the printer.
NOTE:
HP recommends plugging the printer directly into a wall outlet.
If the issue persists, I'd suggest you contact HP in your region regarding the service options for your printer
Hope this helps! Keep me posted.
And, Welcome to the HP Support Community.
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Yes" on the bottom right to say “Thanks” for helping
01-24-2022 08:27 AM
Hi @RickG4,
I'd like to help!
I understand you are facing a printer failure error.
Try the below suggestions -
Step 1: Check for obstructions in the carriage path
Clear obstructions from the carriage area inside the printer.
-
With the printer on, disconnect the power cord from the rear of the printer.
-
Open the door to access the carriage inside of the printer.
-
Look in the carriage path for debris such as crumpled paper or dislodged labels, and then remove any that you find.
-
Use your hand to move the carriage to each side, making sure it moves freely. If the carriage is stalled or docked to one side of the printer and you cannot move it, continue with these steps.
-
Close the carriage access door.
-
Reconnect the power cord to the rear of the printer, and then turn the printer on.
If the error persists, continue to the next step.
Step 2: Reset the printer
Reset the printer to recover from printer failures.
-
With the printer turned on, disconnect the power cord from the printer.
-
Unplug the power cord from the power source.
-
Wait 60 seconds.
-
Reconnect the power cord to a wall outlet and to the printer.
NOTE:
HP recommends plugging the printer directly into a wall outlet.
If the issue persists, I'd suggest you contact HP in your region regarding the service options for your printer
Hope this helps! Keep me posted.
And, Welcome to the HP Support Community.
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Yes" on the bottom right to say “Thanks” for helping
02-14-2023 05:26 AM
Hello,
HP Printers - An 'Ink System Failure' or 'System Supply Problem' Error Displays
Reset the printer
Reset the printer to recover from printer errors or failures.
-
If your printer has a rechargeable battery, remove it.
-
With the printer turned on, disconnect the power cord from the printer.
-
Unplug the power cord from the power source.
-
Wait 60 seconds.
-
Reconnect the power cord to a wall outlet and to the printer.
NOTE: HP recommends plugging the printer directly into a wall outlet. -
Turn on the printer to complete the reset.
JessikaV
HP Support Community Administrator
Didn't find what you were looking for? Ask the community