Printer indicates Black Ink is empty but cartridge was changed 4 days ago

[DebbyMcG]

The printer is indicating black ink cartridge is empty, yet it was changed 4 days ago.  Thinking this was a cartridge issue I installed another back ink cartridge but it still indicated the ink is empty.

[Raj1788]

@DebbyMcG

Clean the ink cartridge and carriage electrical contacts

The printer might display an ink cartridge error if the ink cartridge contacts are dirty.

1. Gather the following items to clean the ink cartridge and carriage:

   • Clean distilled water. Use bottled or filtered water if distilled water is not available. Tap water can contain contaminants that damage the ink cartridge.

   • Clean cotton swabs or any soft, lint-free material that will not stick to the ink cartridges (coffee filters work well).

   • Sheets of paper or a paper towel to rest the ink cartridge on during cleaning.

2. Open the ink cartridge access door and wait until the carriage is idle and silent.

3. Disconnect the power cord from the back of the printer.

4. Remove the ink cartridge and place it on a piece of paper with the nozzle plate facing up.

   NOTE: 

   Do not leave the ink cartridges outside of the printer for more than 30 minutes. If the ink cartridge is outside of the printer for too long, the ink can dry and clog the nozzles.

5. Dip a clean foam-rubber swab or lint-free cloth into distilled water, and then squeeze any excess water from it.

6. Clean only the copper-colored contacts

   1. Copper-colored contacts

   2. Ink nozzles (do not clean)

7. Repeat these steps for the other ink cartridge.

8. Lightly moisten another cotton swab with distilled water, and then squeeze any excess water from the swab.

9. Use the swab to clean the electrical contacts in the carriage, located inside the printer on the carriage slots.

   

10. Wait 10 minutes to allow the ink cartridge and carriage electrical contacts to dry.

11. Reinstall the ink cartridges.

12. Close the ink cartridge access door.

13. Reconnect the power cord to the back of the printer.

14. Press the Power button to turn on the printer.

15. Try to print a page.

Keep me posted, how it goes!

If the information I've provided was helpful, give us some reinforcement by clicking the Accepted Solution and Kudos buttons, that'll help us and others see that we've got the answers!

Thank you for joining the HP Community.

Have a great day!

Cheers:)