Printer issue

[MariaDan]

Hello All.
I face an issue with my HP Deskjet Plus Ink Advantage 6000 All in one printer series printer.
The i (information) button is on.  I give documents for printing, but they are not printed (they remain in queue).  On the other hand, when I press for some seconds the i (information) button, I get the Printer Information sheet (which means that there is no paper issue or ink issue).

I contacted Virtual Assistant, they sent me some info but I cannot find what is going on.

Can any one help on this?

Thanks!

[Sneha_01 · Accepted solution]

Hi @MariaDan,

Welcome to HP Support Community.

Thank you for posting your query, I will be glad to help you.

Let's try to troubleshoot the issue with your HP Deskjet Plus Ink Advantage 6000 series printer. The fact that the "i" (information) button is on and documents remain in the queue suggests there might be a communication or software issue. Here’s a detailed step-by-step guide to help you resolve this problem:

Step-by-Step Troubleshooting Guide

1. Clear the Print Queue

• Go to Settings > Devices > Printers & scanners.Select your HP Deskjet Plus Ink Advantage 6000 printer and click Open queue.Right-click on each job and select Cancel to clear the print queue.

2. Restart the Printer and Computer

• Turn off the printer.Unplug the power cord from the printer and the wall outlet.
• Wait for at least 60 seconds.Plug the power cord back in and turn on the printer.
• Restart your computer to ensure there are no pending software issues.

3. Check Printer Connection

• Ensure the USB cable is securely connected to both the printer and the computer.Try using a different USB port on your computer.Ensure your printer is connected to the same Wi-Fi network as your computer.Print a network configuration page to verify the connection status.

4. Reinstall Printer Drivers

• Go to Control Panel > Programs > Programs and Features.Find and uninstall any HP printer software.
• Go to the HP Customer Support - Software and Driver Downloads page.Enter your printer model number and download the latest drivers.Follow the on-screen instructions to install the drivers.

5. Run HP Print and Scan Doctor:

• Download and run the HP Print and Scan Doctor tool.Follow the prompts to diagnose and fix common printing issues.

6. Check Printer Status and Settings

• Go to Settings > Devices > Printers & scanners.Select your HP Deskjet Plus Ink Advantage 6000 printer and click Manage.
• Click Set as default.In the Printers & scanners menu, make sure your printer status is set to Ready and not Offline.

7. Update Printer Firmware

• Go to the HP Customer Support - Software and Driver Downloads page.Enter your printer model number and search for the latest firmware update.Follow the instructions to download and install the firmware update.

8. Check for Software Conflicts

• Temporarily disable any firewall or antivirus software on your computer.Try printing a document to see if it resolves the issue
• Make sure there are no other printer management programs or drivers installed that might conflict with the HP drivers.

I hope this helps.

Take care and have a good day.

Please mark this post as “Accepted Solution” if the issue is resolved and if you feel this reply was helpful click “Yes”.

Rachel571

HP Support

[MariaDan]

Hi Rachel571.
I followed your guidelines, right after I restarted my laptop and after I cancelled all printing jobs in queue, I was able to print without following all the steps you mentioned.  Maybe it was an updating issue or something like this.  Hope it will not appear tomorrow again! 🙄
In any case, thank you very much for taking time to answer to me and help me.

Have a nice day, you, too.

[Sneha_01]

Hi @MariaDan,

Thank you so much for your response. I am glad the issue is resolved.

Is there anything else that I can help you with today?

Please mark this post as “Accepted Solution” if the issue is resolved and if you feel this reply was helpful click “Yes”.Take care and have a great day ahead!

Rachel571 

HP Support