Printer screen lights on without any selection, and the power can’t off or restart.

[Cindym7]

HP printer screen light on HP printer light on without any functionI  And the power can’t not turn off, I tried  everything to reset my HP printer but the problems can’t be resolved. I need to unplug the printer to turn off the printer.please help me.thanks!

[Elohi_NR]

Hi @Cindym7,

Welcome to the HP Support Community. 

I'd like to help!

To provide you with an accurate solution, I'll need a few more details:

Did you try using another USB cable?

Did you try it on another USB port?

You could try to check this on another computer and see if the issue persists,

In the meantime, let's try these steps here:

Please make sure that the printer is connected directly to the wall outlet and not to the surge protector.

Let's perform a Hard reset on the printer.

* With the printer turned on, disconnect the power cord from the rear of the printer and also unplug the power cord from the wall outlet.

* Remove USB cable, if present.

* Wait for 2-3 minutes, press and hold the power button on your printer for about 30 seconds to remove any additional charge.

* Now plug back the power cable straight to a wall outlet without any surge protector or an extension cord and then plug back the power cord to the printer.

* Turn on the printer and wait till warm-up period finishes and the printer is idle.

Next thing, I would suggest here is to do a clean installation.

First, unplug the USB cable from the printer if present.

·         Go to Control panel – Programs and feature – Select all the HP Officejet printer entries and uninstall them.

·         Now go to Control panel – Devices and printer – Select all the printer entries and remove the device.

·         Restart your computer.

·         Click the bottom-left Start button on the desktop, type device manager in the search box and tap Device Manager on the menu.

·         Once in device manager, click on the view tab in the top & choose “Show hidden devices”.

·         Then from the device manager list, check the entries under “Printer”  – If there are any entries, please right click and choose “uninstall” – In the confirm device un-install pop-up, make sure you select the box which says “Delete the driver software for this device".

·         Also, check the entries under "printer queue" and "imaging devices" and repeat the same exercise. Delete any printer entry or any entry which says “Unknown device”.

·         Once done, close device-manger. Then press the "windows key" + "r" to get the "Run" window open - Type "printui.exe /s" and press enter.

·         Under print server properties, go to drivers - remove any entry there as well.

·         Again, go to run window, type – “c:/programdata” – Go to Hewlett Packard folder, remove any printer related folders & files.

·         Once done you can try cleaning out your temporary files and cached files. You can try using automated applications like some cleaner software's that you can download from the internet.

·         Now restart your computer again.

·         Open the Run window again, type “services.msc” and press ok to get services window.

·         Scroll down to “Remote Procedure Call (RPC)” – right-click and go to properties. Make sure the service is started and startup type is “Automatic”.

·         Now scroll up and go to “Function Discovery Provider Host” – right-click and select properties – Change the startup type to “manual” and start the service.

·         Repeat the same exercise on “Function Discovery Resource Publication” as well.

Hope this helps! Keep me posted for further assistance.
Please click “Accepted Solution” if you feel my post solved your issue, it will help others find the solution. Click the “Kudos/Thumbs Up" on the bottom right to say “Thanks” for helping!

[Elohi_NR]

Hi @Cindym7,

Hope I was able to fix the issue. If you need further assistance, feel free to reach out to us. 

Give us some reinforcement by clicking the Accepted Solution button, that'll help us and others see that we've got the answers and did reply to you!

[Elohi_NR]

Hi @Cindym7,

As we did not hear from you, I'll be closing this case for now. If you need further assistance, feel free to reach out to us.