Ready 2 Download fw corrupt - what does it mean and what shouldbe done?

[LG083]

The HP LaserJet Pro MFP M227fdw printer is stack on the message: Redy 2 Download FW corrupt. What does it mean and what should be done?

[Nal_NR]

Hi @LG083,

Welcome to the HP Support Community. 

I'd be happy to help you! 

Perform a power reset on the printer.

1. Turn the printer on, if it is not already on.
2. Wait until the printer is idle and silent before you continue.
3. With the printer turned on, disconnect the power cord from the rear of the printer.
4. Unplug the power cord from the wall outlet.
5. Wait at least 60 seconds.
6. Plug the power cord back into the wall outlet.
      NOTE: HP Recommends connecting the printer power cord directly to the wall outlet
7. Reconnect the power cord to the rear of the printer.
8. Turn on the printer, if it does not automatically turn on.
9. Wait until the printer is idle and silent before you proceed.

Since you have already flashing firmware, the only option left is to perform a full reset and re-initialize the printer. 

The reset instructions are specific for your printer and performing those steps on a different printer may brick the device.

 I've send you a private message with reset instructions, follow the reset instruction to perform a full reset and re-initialize the printer. In order to access your private messages, click the private message icon on the upper right corner of your 

HP Forums profile, next to your profile Name or simply click on this link.

Hope this helps! Keep me posted for further assistance.

Please click “Accepted Solution” if you feel my post solved your issue, it will help others find the solution. Click the “Kudos/Thumbs Up" on the bottom right to say “Thanks” for helping!

[Repairatrooper]

You can also refer to this older post for guidance if above does not resolve the issue: https://h30434.www3.hp.com/t5/LaserJet-Printing/HP-1536DNF-Firmware-Corrupt-Ready-2-Download/m-p/763...