-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
- HP Community
- Printers
- Printing Errors or Lights & Stuck Print Jobs
- Unable to align Avery labels to 7520 Photosmart printer

Create an account on the HP Community to personalize your profile and ask a question
06-05-2017 03:59 PM
Avery label 5195 worked on previous HP printer, but will not align properly on 7520
Top and left margin are incorrect and spacing between labes incorrect.
Tried using Avery's software and MS Word. Same probl;em
Solved! Go to Solution.
Accepted Solutions
06-07-2017 07:20 AM
Hello, @GWNeal
Glad to know that you found a workaround to adjust the label margins.
This could be caused due to the printer drivers as well. You can try to reinstall the drivers and check. Here are the steps:
- Unplug the USB cable from the printer and computer if present.
- Go to Control panel – Programs and feature – Select all the HP Photosmart printer entries and uninstall them.
- Restart your computer.
- Now click on http://ftp.hp.com/pub/softlib/software12/COL43773/mp-108670-3/PS7520_1315-1.exe to download and install the printer drivers.
- Connect the USB cable if prompted and follow the onscreen instructions to complete the installation.
If you have any troubles, let me know and I will do my best to help!
Cheers 🙂
Please click "Accepted Solution" on the post that solves your issue to help others find the solution. To show appreciation for my help, please click the "Thumbs Up Icon" below!
DVortex
I am not an HP Employee
06-06-2017
02:40 PM
- last edited on
04-01-2024
05:55 AM
by
JessikaV
Hello, @GWNeal - Hope you are well 🙂
Thanks for your continued participation in HP Support Forums!
I see that the printer is printing the Avery labels slightly off the margin. You have also tried printing the labels using the Microsoft Word application.Appreciate your efforts so far, I'll do my best to find you a solution 🙂
First off, go to http://hp.care/2py0T7f and check under “How do I print envelope address labels?” and follow the steps listed.
Now, check these Avery support documents which will help you printer better.
Please let me know if this resolves the issue, or if you require further assistance!
Good luck 🙂
Please click "Accepted Solution" on the post that solves your issue to help others find the solution. To show appreciation for my help, please click the "Thumbs Up Icon" below!
DVortex
I am not an HP Employee
06-06-2017 03:58 PM
Thanks for the reply, however none of the links suggested, address or fix the issue. I am using Word 2010. The deminsions for the Avery label in Word is correct, but when I print the lable, the 1st print line is 1 inch from the top of the sheet, It should be 1/2 inch. It used to work on an old HP printer, don't remember the model. I have used the label adjustment in Word to compensate for descrepancy. Unless you have a fix for the printer, consider the issue closed.
06-07-2017 07:20 AM
Hello, @GWNeal
Glad to know that you found a workaround to adjust the label margins.
This could be caused due to the printer drivers as well. You can try to reinstall the drivers and check. Here are the steps:
- Unplug the USB cable from the printer and computer if present.
- Go to Control panel – Programs and feature – Select all the HP Photosmart printer entries and uninstall them.
- Restart your computer.
- Now click on http://ftp.hp.com/pub/softlib/software12/COL43773/mp-108670-3/PS7520_1315-1.exe to download and install the printer drivers.
- Connect the USB cable if prompted and follow the onscreen instructions to complete the installation.
If you have any troubles, let me know and I will do my best to help!
Cheers 🙂
Please click "Accepted Solution" on the post that solves your issue to help others find the solution. To show appreciation for my help, please click the "Thumbs Up Icon" below!
DVortex
I am not an HP Employee
06-09-2017 10:15 AM
Hi! @GWNeal, I am the MrRobot. It looks like you were interacting with @Dvortex, but he is out of the office today so I'll take over from here.
I am happy to hear that your issue got resolved.
If you have any queries in future related to any HP products, you can always reach out to us.
We will try our best to help you out.
Take care,
Have a great day ahead! 🙂
A4Apollo
I am an HP Employee