error code OXB8000448 on officejet 4630

[bobbiek1]

error code OXB8000448 on officejet 4630

[Raj_05]

Hi @bobbiek1,

Welcome to HP Support Community.

Thank you for posting your query, I will be glad to help you.

The error code OXB8000448 on your HP OfficeJet 4630 usually indicates an issue with the printer's firmware or a hardware problem. Here are some steps you can try to resolve this issue.

Reset the Printer:

• Turn off your printer and unplug it from the power source.
• Wait for about 1-2 minutes.
• Plug the printer back in and turn it on.

Update Firmware (if possible):

• Check if there's a firmware update available for your HP OfficeJet 4630.
• Visit the HP support website, enter your printer model, and look for firmware updates in the Downloads section.

Check for Paper Jams or Obstructions:

• Sometimes, paper jams or obstructions can cause error codes. Open the printer and check for any jammed paper or foreign objects.

Check Ink Cartridges:

• Ensure that the ink cartridges are properly installed and have sufficient ink levels. Replace any cartridges that are low or empty.

Factory Reset the Printer:

• Perform a factory reset on the printer to clear any internal errors.
• This can usually be done through the printer's menu or settings. Refer to your printer's manual for specific instructions on how to perform a factory reset.

These steps should help you troubleshoot and resolve the OXB8000448 error on your HP OfficeJet 4630 printer.

I hope this helps.

Take care and have a good day.

Please click “Accepted Solution” if you feel my post solved your issue, it will help others find the solution. Click the “Kudos/Thumbs Up" on the bottom right to say “Thanks” for helping!

Alden4

HP Support 

[bobbiek1]

Unfortunately, this fix didn't work.  I think my printer is dead. Thanks for your support.

[A_Gayathri]

Hi @bobbiek1, 

Welcome to the HP Support Community

I understand you are getting the error code OXB8000448 on officejet 4630. Not to worry I will help you to get a resolution to resolve the issue.

I'm sending a private message to assist you with the next action.

Please check your Private message icon on the upper right corner of your HP Community profile Next, to your profile Name, you should see a little blue envelope, please click on it or simply click on this link.

I hope this helps! Keep me posted.

Please click “Accepted Solution” if you feel my post solved your issue, it will help others find the solution.
 

Gaya1238

HP Support