-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
- HP Community
- Printers
- Printing Errors or Lights & Stuck Print Jobs
- error code e0

Create an account on the HP Community to personalize your profile and ask a question
06-09-2014 04:52 AM
my hp 1136 printer regullary showing e0 error i replace media but still not recover from this.
Solved! Go to Solution.
Accepted Solutions
06-10-2014
02:02 PM
- last edited on
12-28-2021
07:00 AM
by
AgathaV
Welcome to the HP Forums zubair000,
I see by your post that you are getting a error code e0.
I can help you with this issue.
The error code e0 is for a paper jam.
Make sure the paper tray isn't loaded too full.
I have provided the manual which provides the areas to check for a paper jam.
Laserjet m1136. Start on page 206. You might need a flashlight to look in the toner area.
- I would do a power reset to see if that will resolve the issue.
- With the printer still turned on, disconnect the power cable from the back of the printer.
- Then disconnect the power cable from the wall outlet.
- Wait 10 seconds and reconnect the power cable back to the wall outlet first, then the back of the printer and power it on again.
- Make sure the printer is connected directly to a wall outlet. (don't use a power hub or a surge protector)
Page 189 provides the steps for cleaning the paper path through the software.
✔️ Test the printer.
If you need further assistance, let me know.
Have a nice day!
Thank You.
I work on behalf of HP
Click the Thumbs Up below to say “Thanks” for helping!
06-10-2014
02:02 PM
- last edited on
12-28-2021
07:00 AM
by
AgathaV
Welcome to the HP Forums zubair000,
I see by your post that you are getting a error code e0.
I can help you with this issue.
The error code e0 is for a paper jam.
Make sure the paper tray isn't loaded too full.
I have provided the manual which provides the areas to check for a paper jam.
Laserjet m1136. Start on page 206. You might need a flashlight to look in the toner area.
- I would do a power reset to see if that will resolve the issue.
- With the printer still turned on, disconnect the power cable from the back of the printer.
- Then disconnect the power cable from the wall outlet.
- Wait 10 seconds and reconnect the power cable back to the wall outlet first, then the back of the printer and power it on again.
- Make sure the printer is connected directly to a wall outlet. (don't use a power hub or a surge protector)
Page 189 provides the steps for cleaning the paper path through the software.
✔️ Test the printer.
If you need further assistance, let me know.
Have a nice day!
Thank You.
I work on behalf of HP
Click the Thumbs Up below to say “Thanks” for helping!