my printer does not print full page document

[ccc83]

I have a HP DeskJet 3755 printer. I am not able to print full page document.  It only prints the left side of the document.

[Nal_NR]

Hi @ccc83,

Welcome to the HP Support Community. 

I understand that you are facing issues with printing. I'd like to help!

Don't worry as I have a few steps which should help you resolve this issue.

To provide you with an accurate solution, I'll need a few more details:

Did you make any changes on the printer before the issue started?

Are you able to make a copy from the printer?

In the meantime, let's start off by performing a Hard reset on the printer and make sure that the printer is connected directly to the wall outlet and not to the surge protector.

Remove all the ink cartridges and then try to perform a hard reset on the printer.

With the printer turned on, disconnect the power cord from the rear of the printer and also unplug the power cord from the wall outlet.

Remove USB cable, if present.

Wait for 2-3 minutes, press and hold the power button on your printer for about 30 seconds to remove any additional charge.

Now plug back the power cable straight to a wall outlet without any surge protector or an extension cord and then plug back the power cord to the printer.

Turn on the printer and wait till warm-up period finishes and the printer is idle.

Now insert the ink cartridges and then try to print a test page and check if it works.

Let’s first try and make a “photocopy” to determine whether the issue is with the printer or not. Place a document on the scanner glass and choose “Copy” option. If the printer is making a good copy, then the printer hardware is fine.

Let's try these steps here to uninstall and reinstall the printer drivers:

1.) In Windows, search for and open Programs and Features

2.) Select your HP Printer

3.) Select Uninstall

4.) In Windows, search for and open Devices and Printers

5.) In the Devices and Printers windows look for your HP printer. If you see it listed right-click on it and choose 'Delete' or 'Remove Device'

6.) Open up the run command with the "Windows key + R" key combo.

7.) Type printui.exe /s and click Ok. (Note: there is a space in between “printui.exe” and “/s”)

8.) Click on the "Drivers" tab

9.) Look for HP Printer driver. If you see it Click on it and click Remove at the bottom

10.) Select Ok

11.) Select Apply and Ok on the Print Server Properties windows

12.) Close Devices and Printers

13 ). Restart the PC

14 ). Now click on this link and install the updated printer drivers

15 ). Connect the USB cable only when prompted and then follow the on-screen instructions to complete the setup.

Hope this helps! Keep me posted for further assistance.
Please click “Accepted Solution” if you feel my post solved your issue, it will help others find the solution. Click the “Kudos/Thumbs Up" on the bottom right to say “Thanks” for helping!