network printer prints slowly for one PC

[Larrya2]

I'm having a problem with my wireless Officejet 4500 printer, printing very slowly from my wife's gateway laptop. When printing from it, 45 seconds per sheet is common for text only. If I print the same document from my PC the document is done in seconds. I have verified all settings are the same for both windows 10 computers. I also tried uninstalling and reinstalling hardware and software with no change in results. This problem just surfaced recently and I'm at a loss as to where to look for a solution.

Thanks in advance

[Raj1788]

@Larrya2

This is a driver issue.

Use HP Print and Scan Doctor to check the drivers.

Download a special version of HP Print and Scan Doctor.

1. Download HP Print and Scan Doctor.

2. Run HPPSdr.exe from the download location on your computer.

3. Once HP Print and Scan Doctor opens, click Start, and then select your printer.

   • If your printer is not in the list, turn it off and on and then click Retry.

   • If there is a connection problem, follow the instructions in HP Print and Scan Doctor.

4. If a screen prompts you to turn on printer updates, click Yes.

5. If a screen prompts you to make your printer the default printer, click Yes.

If the issue persists, Delete the driver at the root level and Install the drivers, follow the steps below:

Remove the USB if connected

1.) In Windows, search for and open Programs and features 

2.) Select your HP Printer 

3.) Select Uninstall 

4.) In Windows, search for and open Devices and printers 

5.) In the Devices and Printers windows look for your HP printer. If you see it listed right-click on it and choose `Delete' or `Remove Device' 

6.) Open up the run command with the "Windows key + R" key combo. 

7.) Type printui.exe /s and click Ok. (Note: there is a space in between "printui.exe" and "/s") 

8.) Click on the "Drivers" tab 

9.) Look for HP Printer driver. If you see it Click on it and click Remove at the bottom 

10.) Select Ok

11.) Select Apply and Ok on the Print Server Properties windows

12.) Close Devices and Printers 

Then, Click on this link: https://support.hp.com/in-en/drivers/selfservice/hp-officejet-4500-all-in-one-printer-series-g510/39... to download and install the Full Feature Software and Drivers.

Assign Manual IP to the printer:

1) Print a Network configuration page from the printer's control panel. 

2) Look for IP address from the Network configuration page. 

3) Open web browser - Chrome or IE or any other browser that you are using. 

4) Type the IP address mentioned on Network configuration page into the browser's address bar or URL bar and press enter button. 

5) Go to the Network tab. 

6) Click on Networking from the left pane. 

7) Then click on Network Address (IP). 

😎 Click on Manual IP Address and go to suggest a Manual IP. 

9) Scroll down the screen and select Manual DNS server. 

10) Enter the Primary and secondary DNS server from the Network Configuration page into the Manual Preferred DNS server field. 

11) Click on Apply. 

Refer to the video link for step by step instructions - https://www.youtube.com/watch?v=SCnYyq80V9g 

Note: The video is for win 8 but steps are similar for other operating systems as well. You need to enter the IP address in the browser's URL or the address bar to access the printer page.

Keep me posted, how it goes!

If the information I've provided was helpful, give us some reinforcement by clicking the Accepted Solution and Kudos buttons, that'll help us and others see that we've got the answers!

Thank you for joining the HP Community.

Have a great day!

Cheers:)

[Larrya2]

None of the repair options have changed anything on my wife's laptop, but 2 desktops and my laptop work fine. All machines run either windows 10 Pro or Home. The printer is wireless only with all settings done manually by myself.

Print and Scan Dr. is installed and working on all. HP Solution Center is installed and running on all. (latest versions for both programs)

I have fully uninstalled and reinstalled all software and drivers associated with this printer, and rebooted after to clear the laptop.

No Joy!

What could I have possibly missed?

I'm stumped.

[Raj1788 · Accepted solution]

@Larrya2

I suggest you do a Hard Reset on the printer

(1) Turn the printer on, if it is not already on.

(2) Wait until the printer is idle and silent before you continue.

(3) With the printer turned on, disconnect the power cord from the rear of the printer.

(4) Unplug the power cord from the wall outlet.

(5) Wait at least 60 seconds.

(6) Plug the power cord back into the wall outlet.

NOTE: HP recommends connecting the printer power cord directly to the wall outlet.

(7) Reconnect the power cord to the rear of the printer.

(8) Turn on the printer, if it does not automatically turn on.

The printer might go through a warm-up period. The printer lights might flash, and the carriage might move.

Wait until the warm-up period finishes and your printer is idle and silent before you proceed.

Update the firmware for the printer.

Using this link: https://support.hp.com/us-en/document/ish_1776648-1643972-16

Restart the printer.

Keep me posted, how it goes!

If the information I've provided was helpful, give us some reinforcement by clicking the Accepted Solution and Kudos buttons, that'll help us and others see that we've got the answers!

Have a great day!

Cheers:)